Gender
Male
About
Location
Yuma, AZ
About Me:
Work on UAV based projects
Please tell us a bit about your UAV interest
Remote Sensings
Hometown:
Greenwood, ME
Activity Feed
"Does anyone have the 2.0.5 version of OpenTX w/ haptic or know where I can find it? "
Has anyone done a successful autotune with their IRIS? I try to perform an autotune with ch7 and the gui says autotune but the quad does nothing. My friends also does the same thing.I
"So I can't seem to get autotune to actually work. I have CH 7 setup to intiate and mission planner says its in autotune when I hit the switch but does not actually do any of the autotune sequence. I did another radio cal, did an save trim, cal'd the…"
"I am flying the same one as Andrew with great results. Also have tried the valuehobby 4000mAh ones with good results and am waiting on the valuehobby 5000mAh to see the results with that."
"I hate to say it but the batteries I received were not great quality. Both of them would drop like a rock after 10.5. I was 10 ft off the ground and it was at 8.8V by the time it landed. I tried another battery that was 2650 and a year old and it…"
"To help everyone out here. There are two major GPS bands:
L1: 1575MHz
L2: 1227MHz
http://en.wikipedia.org/wiki/GPS_signals#Frequencies_used_by_GPS
Most GPS receivers only use the L1 band.
NEO-6M (Reference pg 6)
LEA-6H (Reference pg 6)
While the…"
L1: 1575MHz
L2: 1227MHz
http://en.wikipedia.org/wiki/GPS_signals#Frequencies_used_by_GPS
Most GPS receivers only use the L1 band.
NEO-6M (Reference pg 6)
LEA-6H (Reference pg 6)
While the…"
"I did not. Hopefully somebody else can comment"
"You don't really need the modem for much. I would say that you don't want to run autonomous missions with it. Other than that you should be good. "
"I plan to mount a mobius and an fpv cam to the gopro mount on the front. I ordered the materials this weekend to put together a mount. "
"I am speaking specifically about the alt hold and loiter (GPS hold) modes. I was flying a phantom 2 the night before and it was really drifting around out of the box. "
Opening opening the box I noticed that everything was very well packed and well laid out. I really liked all the nice touches the came with the kit, from the wrench's, to the extra prop collets.I made a couple of videos. Overall my impressions are…
"Ryan have you made any progress?"
"Whats new with this project. Eagerly waiting an update! Have you finished fully porting this to java?"
"I would like to add a function in to use the trim sliders on my joystick. I guess you would have to couple the trim slider to each axis. Also i was having issues getting my mode switch and my y axis to work on my Logitech G940 system. They are not…"
"Have you made any new progress on this project lately?"
