I got the V-Tail and the Quadrino Nano as a controller. I could assembly the frame of the copter yesterday. Really well done...I found the quality of the product very good.
Now...I don't understand how to connect the electric parts and the…"
did you get the lynxmotion controller? How flies?Would you suggest it as a standard controllerf?
I ordered my VTail 500 but it gets a couple of months to get delivered. As a controller I bought the Quadrino, because: it had 40% discount and…"
When you say: "I had to reverse the motors" do you mean:
- I inverted the sense of rotation just swichting the wires (and using other propellers to generate force in the right direction)
- I inverted the installation of the motors…"
Hello everybody,I m just curios if the implemented planner is giong to connect all waypoints through the generation of a spline or uses others algorithms. And if yes, which kind of spline is going to be generated? B-Spline? Catmull-Rom? Quintic…
Hi guys,I wanted to ask whether the Lynxmotion V Tail 500 is supported by ArduCopter or not.As you can see the airframe consists of two motors plus a V Tail with both inverted motors. Since I don t want to buy the MultiWii suggested by Lynxmotion…
"Thank you very much Sean for your answer.
What I was looking for, is a PID or PD algotihm for flying the path as precise as possible.
BUT you gave me really a good suggestion because for implementing it I need anyway such path-finding code.
Hi guys,I m developing a quadcopter but I'm looking for literatur or example code (algorithm) to write a program in C++. In order to fly throught 3D waypoints it must implement a controller for the path.Could yu link some interesting and useful…
I need to connect and send data (sensors readings) from my RC plane to the PC.
Usually I would use a SD Card and connect it to my processor (Teensy ARM7) on board and then check saved data on my PC.
But in this case I should send so much…"
Hi all guys, I have a very strange problem.I bought an ESC to control the motor of my electric model, and I connected evertything to my Autopilot, but I realized the ESC makes strange noises and cannot understand which is the…
Dear all, I have a boring but (hopefully) simple question about 6 DOFIMU...to me the following situation is not completely clear.Any 6 DOF IMU has accelerometer and gyro on three different perpendicularaxis, ok.My question is about the Z…