Please tell us a bit about your UAV interest


Activity Feed

Flo posted a discussion
Hi,i am thinging about to build up a new hexa copter with a V-Frame.Is this supported with 2.9.1? i just saw that the new mission planner allows me to configure V-Frame Setup Mode for a hexa copter.Even the terminal / firmware seems to support…
May 6, 2013
Flo replied to Flo's discussion Guided Mode manual?
"Here is a video from the start
Apr 23, 2013
Flo posted a discussion
Hi,today i tested my F330 with Auto and guded Mode.Auto is working fine - but i have some Problems with guided.When i switch into guided mode it flys to some direction i did n´t configured....I made some tests.With "Fly to here" i get a new Waypoint…
Apr 23, 2013
Flo replied to Sergio Luis de Almeida's discussion Why only records video up to 5fps?

any new on this topic.
I have also an Easycap Device,
Missionplanner is only showing 5fps as video format.
CPU is an I7 - so CPU sholud not be the problem

thx for help
Apr 22, 2013
Flo replied to Randy's discussion ArduCopter 2.8 / 2.8.1 released

i am not sure it was already dicussed...
Can i fly loops and flips with the new default Acro Mode with "AXIS_ENABLE = 1"?
I thougt there was a limitation in firmwares before 2.8
Oct 28, 2012
Flo replied to Jason's discussion Need Help
"Hi Jason
Try to switch it on with your throttle in high position. If it ´s working you have to reverse your channel
Oct 4, 2012
Flo replied to Flo's discussion Rate Imax

i alreadytried a higher P term (i started with i = 0). But it quickly starts oscilating.
With windy weather i think i even have to lower Rate P

With low Rate i and imax i can´t hold the angele in acro mode (and i really like flying in…"
Sep 25, 2012
Flo posted a discussion
Hi,can somebody explain me more detailed the Imax Values?Well the AC2 Tuning guide says it is the maximum amount of Rate_I  can build up.But why should i limit it for Rate?Flying in Acro mode i need in (my opinion) relative high i and imax Rate…
Sep 25, 2012
Flo posted a discussion
HiI have a small Quad frame with hk Park 300 Motors and 8x4 probsAfter tweaking some pid Values it flies very well. The only Problem is yaw.Sometimes when flying fast or after some sharp corners yaw seems to oversteer and doesn't stop the Rotation.I…
Aug 11, 2012
Flo replied to Jeff Smith's discussion Yaw rate D term, what is its function?

i have problems settiing up my small quad for Yaw.
When flying fast it doesn´t  hold the angle.

Can you give me more details about the parameters.

Is there a difference between Yaw  and Pitch/Roll.To my experince both Values - Stab and Rate…"
Jul 26, 2012