Gender
Male
About
Location
Bangkok
About Me:
I am a very creative person and just getting into Traditional Heli, i think it would be an excellent experince and hobby to get into. i love the outdoors and travel here and there, where the crowd tends to be to join for fun. I have been flying the traditional for a few months already and i am loveing it.
Please tell us a bit about your UAV interest
I ve built a few planes and Rc Cars in my past, from diffrent materials like, styrofoam, light metals and light wood. This is more of a challenge and more technical, I have some experince in C programming and Avr Programming, I have a degree in Mechincal Engineering and Electrical Engineering and this is where i can use these skills for fun and not just for work. I want to try to help out in problem that other hobbiest.
Hometown:
San Jose, Ca.
Activity Feed
"Peter,
i had the same problem, and i first started with soldering it on the Board as posted here http://code.google.com/p/ardupirates/wiki/Magnetos, and i was getting similar values as as you posted. Then i tried it away from tall electronics and…"
i had the same problem, and i first started with soldering it on the Board as posted here http://code.google.com/p/ardupirates/wiki/Magnetos, and i was getting similar values as as you posted. Then i tried it away from tall electronics and…"
For the past week I came across with the problem where my Heli is not Takeing off after doing my final PID adjustments in latest MP( wHEN I MEAN TAKE OFF I MEAN IT WON'T GET OFF THE GROUND EVEN WHEN REV'ED UP AT MAX). On the work bench i test all…
"Malcolm,
I found the Heli Trex450 PID Settings...it took me a while to find this but i think i found it. I hope this will help everyone else, if not then back to testing....…"
I found the Heli Trex450 PID Settings...it took me a while to find this but i think i found it. I hope this will help everyone else, if not then back to testing....…"
"Malcolm Churn did an awesome Ardrucopter instructional Setup manual For Traditional Heli, Using Mission Planner and Ardruino programmer. Every step was mentioned clearly and any newbie like myself can follow this manual ( Thanks Malcolm). but when…"
"hello,
Have you checked the all your switches on your controller to see if your autopilot is on? Or try plugging your Pin 8 ( autopilot control) into other available channels on your receiver that might work properly with your setup. If…"
Have you checked the all your switches on your controller to see if your autopilot is on? Or try plugging your Pin 8 ( autopilot control) into other available channels on your receiver that might work properly with your setup. If…"
"I was having the same problem, and i have the whole setup with ArduPilot Mega IMU board (OilPan). I had loaded the latest APM Software and it did exactly as you mention on your post... it will try to connect and after several Dots and waiting.. it…"
