Gender
Male
About
Location
Dublin
Please tell us a bit about your UAV interest
just learning
Hometown:
Dublin
Activity Feed
"Missed this, apologies. I only tried them in 2.4G but they worked fine. I did pick up the adapters befinitiv recommended since he'd done the work on patching their kernels and I wanted to minimise differences from the base platform. "
"I'm using RPI2s with no problem (same dongles)... I don't see any massive improvements compared to what befinitiv has documented. I saw openfpv moved from rpi to Odroids but haven't seen any updates on that project in a long time."
"Thanks Paul, I'll do some reading :)"
"Fair enough. Could you elaborate or point me to how you identified jamming? I could then see what makes it improve. Thanks again. "
"Thanks for looking Paul. What should I be looking at hardware wise? How can I shield the GPS from jamming?"
"I was in open space with nothing in the way, I was basically in a big field. I enabled that logmask and replicated the scenario in my back garden, this time I could only get 5 satellites and HDOP was higher at about 3.8 or so.
New logs…"
New logs…"
"I powered it on and left it for about 20 minutes at one point to see if it would get better but it made no difference, I had about 6 satellites on average and a HDOP <2. The tower app indicated a 3d lock but when I tried to arm in poshold I got the…"
"Has something changed in relation to GPS locks? I was out today for a test flight. Telemetry was telling me I had a GPS 3d lock but if I tried to arm in poshold it failed with a GPS lock required warning. Similarly if I took off in stabilise and…"
"Hi Tilman,
Good to hear things are still progressing, there's not much that can be done about the weather - we have the same problem here (Ireland) although it's starting to get a bit better. I look forward to your next status update!"
Good to hear things are still progressing, there's not much that can be done about the weather - we have the same problem here (Ireland) although it's starting to get a bit better. I look forward to your next status update!"
"does anyone have an update on this project? It seems to have very quiet... "
"@Randy Fancy sharing the stl for that? :)"
"excellent work!"
"Is there a case/shell available that will fit this module? Also, it seems like the connectors are on the back side pointing down, does that not make it awkward to fit it?"
"I seem to have made some progress. I dropped the land voltage to 10v from the default 10.5. At 10v finish I'm using too much mah though, around 4300mah, I think if I up the land voltage to 10.1v I should finish with about 1000mah to spare which…"
Hi All, I have a quadframe hexa with 880kv HengLi motors with 1147 props. I'm using 30A afro escs from HK and a 3S lipo nanotech (5000mah). Apm 2.6 and a Hitec Aurora 9 with optima 9 receiver.After a couple of minutes flight the copter basically…
"I was going to post the same thing tonight!
I have quadframe hexa with 880kv HengLi motors with 1147 props. I'm using 30A afro escs from HK and a 3S lipo (5000mah). Apm 2.6 and a Hitec Aurora 9 with optima 9 receiver.
I've done the calibration a…"
I have quadframe hexa with 880kv HengLi motors with 1147 props. I'm using 30A afro escs from HK and a 3S lipo (5000mah). Apm 2.6 and a Hitec Aurora 9 with optima 9 receiver.
I've done the calibration a…"
