What wires on a Lightware SF30B do I connect to the ADC plug on a Pixhawk ?
The Lightware SF30B can only connected to the ADC plug on Pixhawk, not the serial port because of speed factor.
Has Lightware gone out of business, their web page is not setup
Read more…Using Qgroundcontrol-2.9.4-72, how do you find the Firmware Version of the aircraft you are running ??
Read more…Trying to update Firmware, Does the Drones battery need to plugged in to do Update of PX4 Stack Firmware ?
I Installed the latest Qgroundcontrol and it keeps saying to be sure that SD card is plugged in , It is plugged in and it is the original SD ca
Read more…The FAA is gradually going to push this onto the UAV's. there is a mention of around 2020Read more…
I have a 180A Attopilot on my 680 hexicopter can I run 6S batteries on it ?
Read more…Anyone ever install a Sonar on Pixhawk, or where is any instructions on it ?
here is a Sonar unit at jameco;
Read more…I damaged the red pushbutton switch on my Pixhawk build today.
I called 3DR to order a new one, and I learned that they don't sell the switch any more, unless you buy a complete Pixhawk kit to get a switch. I gather that when as they sell out the misc
Read more…There is talk out there on the Airwaves of Jamming Signals to Drones to knock them out of Sky, I for one can't see this.
If you have a Failsafe programmed into Pixhawk to come home RTL if signal is lost or jammed from RC Radio to Copter.
Again I can't
Read more…Can someone direct me to a website to setup and get working of Two RFD900 modems one on a Pixhawk, Tarot 680 frame ? Or maybe Youtube.com
And the other on a Base Station with LONG rabbit ears.
Thanks for any help !!
Read more…Setting up AUX ports on Pixhawk
I'm using a T8FG Radio and a R6208SB Receiver and I want to setup AUX ports to operate Retractable Landing Gear, Gimble Pitch, and Lights on a Hexicopter , after setup up in
I have been to github to get software for the RFD 900+ but there so much software, I don't know what Firmware I need two get my Two RFD900+ to work together, One on my Hexicopter and one as Base Station.
Please help
Read more…I have Ubuntu-15-04 installed on my Laptop and i went to install Qgroundcontrol and discovered that when I followed instructions it went to install packages off Ubuntu website that it was coming up with Ubuntu-14-04 packages to install, do I need to
Read more…I wondering if to install MissionPlanner on Ubuntu-15-04, or instead Ubuntu-14-04 .
Below is the error I get when I try to install on Ubuntu-15-04. What is going on , i'm new to MissionPlanner.
The XXX in error message, am I suppose to enter apm64 i
Read more…I have a new Pixhawk build.
When doing the Compass and GPS Calibration in MissionPlanner , shouldn't calibration be done outside where you don't have electrical interferences ?
My problem here is Mission Planner is installed on my Windows 7 PC (can't u
Read more…I'm building a Tarot-680Pro with 3DR Pixhawk and I will be using a Fatuba T8FG Radio, And I'm going to be setting up S-Bus, will the FrSky X8R Receiver work with the T8FG Radio without anymore hardware, connected to PixHawk ?
Read more…Is the Pixhawk at this loacation a Good or Bad Buy ?
Read more…I have been checking everywhere, even ebay.com for Carbon Fiber Props 15*5.5 for the SunnySky X4108S 380kv motors 6MM hub.
Can anyone give me some direction on where to find ?
Read more…i'm looking into buying a PixHawk controller , but I need some info.
What is the latest Software Version is there for the PixHawk ?
I understand that the Software can be updated ?
Read more…