"I connected the Odroid to a network that had internet connectivity today and it worked. Do I need to have access to the internet for my Odroid to run mavproxy properly? Or did I misunderstand the DNS issue?"
Hello,First if this is posted in the wrong place feel free to redirect me to a better forum.I've been following this tutorial. I've got a FTDI cable connected as described (without the +5v connected) and that seems to be working. I've set the baud…
"This is awesome stuff! When I saw your post I vaguely remembered seeing a similar post. I did a little searching and found the post. I hope it helps you to gain a little traction in your design. Good luck!…"
I ran across this. There are several different styles and types. You might also look into a transmitter tray that you could mount extra equipment to. I would also eventually like to mount a tablet too, but I haven't had any good ideas just…"
My power module doesn't seem to be providing 5 volts any longer. While I'm waiting for a new power module could I power the entire APM with my BEC by installing JP1 without hurting anything?Thanks,Loren
Well it was bound to happen. Here is the clip:http://www.youtube.com/watch?v=hpE-dyNMmQAMy question is now what?? Narrowing it down a bit I guess is what values in the log should I look at to find out what caused it to flip like it did?2013-09-01…
"Thank you, Thank you, Thank you! I had the first flight today. It was awesome. I didn't have have too many problems. I thought I was doomed at first but simply needed to reverse my elevator. Once did that it flew great.
I took it all apart today to check voltages. Everything checked out. I put it back together and it seems to be working fine now. Thanks for all your help.
I have my quad put together and a couple of folks suggested some changes in my wiring scheme to eliminate the possibility of harming the APM. The comment that I had been following can be found here as well as the post following it. I have removed…
Hi,Attached are a few photos of my first setup. I'm curious what I might be able to layout a little better. I have my distro mounted directly to the X525 top plate. Above that is a piece of plexi with my rx stuck down. Above that is a shock…