Gender
Male
About
Please tell us a bit about your UAV interest
Arducopter (ardupilot mega)
Hometown:
São Paulo
Activity Feed
"Its a good idea... But what command i have to use to send "Turn" message? RC OVERRIDE?"
I'm working on a project that consists control APM with voice commands using the EasyVR shield of arduino. I'm talking to the APM through a C++ program that interprets the voice and sends MAV commands to APM.The problem is: I' dont know how to send…
"Hi Darius,
I dont have any familiarity with javascript, only with c++ or c. But you can find some useful things here: http://diydrones.com/forum/topics/communicating-with-drones-using-d...
Good Luck"
I dont have any familiarity with javascript, only with c++ or c. But you can find some useful things here: http://diydrones.com/forum/topics/communicating-with-drones-using-d...
Good Luck"
"No, I'm sending data through the serial port of my Windows via Xbees. "
I'm working on a project that consists on control my APM with visual studio c++ code. I did the first step: sending a hearthbeat message to APM and receive some parameters like yaw, pitch and roll. I can Arm and Desarm too.My problem is: I want to…
"Thanks for the help, Luca. I'll try to buy another GPS board, because i dont think the firmware has been customized."
"I dont find this parameter. I'm using a APM v1.4, and i dont find nothing like this, involving RTS or CTS."
"Thanks for the answer, but my xbee isn`t bricked. The modules can comunicate, i tried to connect to arduino uno and test one example code, and it works, so its everything ok with the xbees."
"Hi Luca,
The blue led goes directly solid, I checked the values for "gpsstatus" and is always 1, but the "satcount" value is 0. "gpshdop" is 99.99. The red led on the OilPan is blinking always too. It can be a faulty GPS module?"
The blue led goes directly solid, I checked the values for "gpsstatus" and is always 1, but the "satcount" value is 0. "gpshdop" is 99.99. The red led on the OilPan is blinking always too. It can be a faulty GPS module?"
