The latest QGC master has the health indicators when you use the onboard calibration of ArduPilot Copter (3.4.4/3.4.3) wiredUsually the 3rd compass is quite problematic specially on X, but the 2nd compass (1st is the external) manages to…"
"The firmware for the PixHawks is not distributed as a windows installer (msi) You must use a Ground Control Station like Mission Planner, APM Planner, QGroundControl, which are distributed as msi, or other type of installer depending on the…"
Hi allA huge amount of effort has gone into this exciting new release of ArduPilot: Copter 3.4.1.The new features are mostly described on ArduPilot forum blog post but the first few are copied here: New Features (in alphabetical order mostly):New…
"Well, the magic is the quality of the components and the assembly. If the PixRacer (or other delicate electronic component) requires a good power supply to work properly its your choice to get it... Glen Leeon said:
Can anyone tell me if the power…"
"Is there something else to fly than Master ?? The best way to avoid broken props is not to do the optional part of flying drones, ie - take off. After that everything is mandatory :)LoL
"@Nick, I'll ping Tridge/Randy regarding the #158 id, and will let you know.
Jani must be happy for reusing his jDrones boards :)
Nick said:
Hi @Luis. Are you sure I should switch to #158? The Mavlink message set states: "Generic autopilot…"
"@Nick
The componentid #158 was created for generic devices, and I believe Mavpixel fits here.
If you mean MAV_TYPE #18, I also believe this is correct. If something is wrong we'll have a look at it. Let me know and perhaps we can discuss this on…"