"In my opinion all patent institutions should be eliminated from modern world as it stops innovations and overall growth in technology.
Why not share ideas and solutions with everyone for free? It's a bit shameful to patent solution hundereds if not…"
"Gary, thanks for wiki page, will be useful for others.
Dean, you're welcome :)
Adrian, RSSI_RANGE parameter was added to APM firmware, so once uploaded all ground control clients will pick it up without need of making changes in say Mission Planner.…"
For some time I wanted to add ability to provide RSSI from FrSky receiver to APM.RSSI_PIN parameter works fine for that however some of receivers such as mine FrSky D8R-XP outputs 0 - 3.3 V. For that purpose I've added new param and called it…
"Yippee! Full success :)
I couldn't wait for cable replacement so made 6 to 5 pin cable myself by replacing connector on one of the sides. 1 minute job with a needle. No soldering or anything.
And now it works!
Make sure you skip one cable like on…"
"I've got APM 2.6 with external gps/compass but so far with wrong 6-6pin cable.
Should compass work without gps cable connection?
There is red solid led on external gps/compass but in CLI it says "compass initialization fails!"
Will connecting both…"