Location
Henderson, NV
About
Please tell us a bit about your UAV interest
I am interested in developing for the Pixhawk and in Helicopters and Multicopters.
Hometown:
Tuscon, AZ
Activity Feed
"@Gary I was at the UAV Expo, and I recall them saying that the single panel is ~$200 and the 360 was going for ~$500"
"@Quadzimodo I hope it's sarcastic"
"Just sent you a friend request so we can PM I am interested "
"@Scott the faa has no jurisdiction over areas not deemed "navigable airspace", so inside is defiantly unregulated, this is generally accepted to extend to covered areas and netted areas."
"if your wondering what code powers the autotuning it's mostly here: https://github.com/ArduPilot/ardupilot/blob/92106a944ff9646e2cb8990...
if your wondering how to use it you can see that here: http://ardupilot.org/copter/docs/autotune.html"
if your wondering how to use it you can see that here: http://ardupilot.org/copter/docs/autotune.html"
"@John it does make sense, restrict things heavily until the technology has proven itself and you are comfortable with it, hopefully it will continue to relax the laws surrounding UAS"
"@Rob I think before that they will have to form an advisory committee to the rulemaking committee to review this suggestion "
"I am developing some software and am hoping to verify it works on real hardware and while I could build 4 vehicles to test with I am hoping to spend much more time on my software as opposed to working on building and working on a buntch of my own…"
I am looking to see if anyone knows of a ready to fly pixhawk based mapping plane at around the $1500 price point with camera. I know of the TuffWing at around the $2500 price point plus say 200 for the camera. I was also looking at using the RMRC…
"@NiMA I agree the level of restrictions tells me that whoever put this together has no idea what they are doing or has a very specific idea as they greatly narrow the field "
"Read the paper, looks like they used a solo!"
"Love the Nerf dart on the pitot tube at 1:10"
"A challenge that I quickly concluded would be serviced by an off the shelf 800 Size gasser no problem. "
"We weren't able to make it, our helicopter just finished getting flight tested and the vibes are too high to work out, we would be good to go if the deadline was pushed a week :("
"Eric depending on the accuracy of the simulation it takes significant computing resources, possibly they only got enough supercomputer time for one simulation?"
