Location
Amsterdam
About
Please tell us a bit about your UAV interest
Building a quadcopter
Hometown:
Amsterdam
Activity Feed
"I did have the same problems, was the compass. So check your compass output.
"
"
Today i installed 2.37 on my quadcopter. First impression WOW!!! Alt holt is impressing.. But after some flying the quadcopter suddenly turn(yaw) 90 deg (in simple mode) and i was not able to steer because he was now and then turning 90 deg, always…
"Did have the same problem ones...reverse connection from the ESC connector to the APM.
Succes,
Max"
Succes,
Max"
Hi, I'am a little bit confused. I lost track on the difference between ArduCopterNG and ArduCopterMega. And how about the role of ArduPirates?I'am running RC2 (version 1.54) and this is running fine. Trying the ardupirates gives a very unstable…
"Some extra info: after initializing the eeprom again in CLI mode the compass gives data. But after restart it's not working again.
???"
???"
After running fine suddenly my compass is stop working. Giving only zero's..I did read there are some issues with a resistor on the compass board. But i can't find the artikel anymore. Is it possible i need to do that modification?? Thanks,Max
Hi Guys, Need your help again: finished my ArduCopter and started flying. Very nice and stable..but this afternoon i crashed it. Minor dammage on the hardware but aftre the crash the ESC ar not working anymore. My old APM installed, with one output…
"Hi, Christof,
Thanks for replying: yes i did all the wiring as explained. I did load the initial values after witch the sensorvalues make some sense.. And adjusted the tx values.
But the motor values makes no sense. For example: Front en Rear motor…"
Thanks for replying: yes i did all the wiring as explained. I did load the initial values after witch the sensorvalues make some sense.. And adjusted the tx values.
But the motor values makes no sense. For example: Front en Rear motor…"
Hi, I'am working on a AdruCopter (beginner!) and build a nice frame. Ordered all electronics put the software (RC1) in and started testing.All sensors are working as they should but! the values from the motors are very strange.The boards are on my…
Hi, I,am new to quad copters and started a project using a megapilot and de oilpan IMU.After compiling the latest version of ArduCopter and downloading it to the MegaPilot with no problems i see some strange values in de configurator.The values of…
