Gender
Male
About
Location
MSW
About Me:
Videographer and editor
Please tell us a bit about your UAV interest
I love Model / remote control flying, video productions and editing as well as arial photography and video
Hometown:
Sydney
Activity Feed
"
From the manual... 4.Receiver and camera control connector： R: conventional receiver roll channel input T: conventional receiver tilt channel input C: conventional receiver stick mode channel input (rate mode and position mode) S:…"
From the manual... 4.Receiver and camera control connector： R: conventional receiver roll channel input T: conventional receiver tilt channel input C: conventional receiver stick mode channel input (rate mode and position mode) S:…"
Hi All,Can some one please tell me which pins from a 2 Axis Tarot Gimbal controller board connects to the AMP 2.6?There are Nine pins on the Tarot Controller boardTarot%20Pin%20Out%20Wiring.pngtarot1.jpgI tried a few different ways but didn't…
Hi All,I was wondering what is everyone doing to avoind loosing a run away drone? How do you track it down?Like DIY Drones or DJI Phantom.My Phantom was running away and disappearing in the bush far away and I was lucky I got it back in time. How do…
"Hi Can some one give me a step by step instructions for dummies.I am new in this and have got no idea, I just bought and assembeled my;RCTIMER 2-Axis Brushless Gimbal For GoProRCTIMER 2-Axis Brushless Gimbal Controller & IMU v1.0Loaded the driver (I…"
HiCan some one please explain to me what is the difference between the Radio Telemetry Kitfrom 3D robotics and the one from Hobbyking, in picture they look identical but the price difference is huge!3DR Radio Telemetry Kit - 915 Mhz…
"By the way how do you like the Ironman 1000 frame, do you think it worth the money ($500+).
Or should I look for another frame as my second project?
Cdeers"
Or should I look for another frame as my second project?
Cdeers"
"I am building one Ironman 680 at the moment and what you are doing (Ironman 1000) will be my next project. I love to hear what you have done as well. I have ordered my APM and other staff already, had major problem finding Power Dist Board more than…"
"Sorry I meant input"
Any idea how many AMP is the maximum inout for this Hexacopter Power Distribution Boards that 3D Robotics sells?I need 6 x 30A, where can I get them from?ThanksMitchell
"Sorry,
These two then
ArduCopter ESC 20 Amp (from 3D Robotics)
Turnigy Multistar 20 Amp Multi-rotor Brushless ESC 2-4S
and what about the battery,
s2 or s3 one?
Do I need any thing else too, so I can order the same time, I do not want to wait 4 more…"
These two then
ArduCopter ESC 20 Amp (from 3D Robotics)
Turnigy Multistar 20 Amp Multi-rotor Brushless ESC 2-4S
and what about the battery,
s2 or s3 one?
Do I need any thing else too, so I can order the same time, I do not want to wait 4 more…"
Hi All,I am very new to all these and do videography, I want to start making my own Hexacopter from scratch, can you guys guide me through it please?What do I need? I have already purchased a frame on eBay and waiting for it to arrive, I want to…
