"I realize this is quite an old post, but I came across it trying to find out how to change MP from generating the GE file with absolute altitudes and instead include the relative as none of it looks right when played back, you bounce along the…"
"Excellent job! I have been wanting to do something like this but primarily for checking whether a motor sustained damage in a crash or hard landing and should be replaced. Though with a full range of sensors it should be fairly easy to take it…"
Would it be at all possible to create a database containing exactly what the default parameter values are in each build?We have all this wonderful color showing us supposedly where there is a problem, but we have no way of knowing aside from memory…
"Hi Randovan, I'm curious as to what settings you have ended up changing in the gps. I tested and played with many many different configurations and ultimately ended up back with the stock setup and only one or two alterations. My experience was that…"
"On my flame wheel 550 running rc2, I lengthened the stock esc wires so the escs are as far up the arms as possible without re arranging the outputs and my compassmot output said 0,-1, 0... though I wonder if the -1 might be simply from me not being…"
"I have been finding some odd behavior with the compass in rc1 as well, I updated from 2.9.1 and did not think about re-calibrating and my hex flew great on a perfectly still night. Then on a flight the next day I found the compass seemed to drift…"
"If you would like some info on pursuing the black powder ejection pm me and we can talk, however due to regulations it isn't something to be taken lightly or discussed publicly. As for qualifications, I hold a level 2 certification with NAR and have…"
"I don't suppose there is a way to make this able to respond to multiple i2c address inquiries?
I'm just getting started with looking through what you wrote but I just found out that the spektrum data bus is i2c also, I was hoping that with all the…"
"I will likely get some flack for this one but since it is working very well for me, I thought I would post and perhaps I will get some new ideas out of it that may make everything work even better.
First things first, I'm working with a DJI F550…"