Gender
Male
About
Location
Herzliya
Please tell us a bit about your UAV interest
Newbe in this area.
Hometown:
Herzelia
Activity Feed
"What i will be glad to see as user is as following:
1. Row on top of the screen with most importent data like
Gps: Lock/unlock status mark by color and the number of sattelites locked.
Battery: status and usage
Time: Time since take…"
1. Row on top of the screen with most importent data like
Gps: Lock/unlock status mark by color and the number of sattelites locked.
Battery: status and usage
Time: Time since take…"
1. When the throttle is fully down three motors are spinning very slowly and one motor doesn't spin. When raise the throttle a bit the 4th motor that was not running start to spin. Can someone advise what could be the problem? I synchronize all…
1. When the throttle is fully down three motors are spinning very slowly and one motor doesn't spin. When raise the throttle a bit the 4th motor that was not running start to spin. Can someone advise what could be the problem? I synchronize all…
"Update me and tell me if it solved your problem. "
"Hi
After a little research i succeeded to solve my problem, i hope you will solve yours.
To solve this problem:
0. Turn off the mission planner.
1. go to http://www.ftdichip.com/Drivers/D2XX.htm
2. Download the drivers according to your OS, in your…"
After a little research i succeeded to solve my problem, i hope you will solve yours.
To solve this problem:
0. Turn off the mission planner.
1. go to http://www.ftdichip.com/Drivers/D2XX.htm
2. Download the drivers according to your OS, in your…"
"The mission planner install the apm drivers for sure and they define the communication between the apm and the mission planner, maybe those one are apply only to windows 7 and not he for others operating system. I read that a lot of people has…"
I have windows vista. I detected that the mission planner software install driver that doesn't the my operating system. It will be nice if the mission planner can detect the operating system and install the driver accordingly. The drivers can be…
" I installed the mission planner on windows 7 the drivers were installed correctly and the apm wasd detected correctly. I will now install the vista drivers from http://www.ftdichip.com/Drivers/D2XX.htm and see how it be. The issue is that in the…"
"I think i found the problem, but i need to check it. Different operating system need different ftdi drivers. In the begining i installed the apm a2.x drivers as instructed in the user manual. The problem is that those drivers are not fits all OS…"
"My configuration:
Windows vista 32 bits, dell laptop computer, usb cable, arducopter 2.6 mega
1. I downloaded the latest version of the mission plannner ver:3.17 and installed it. Load the mission planner. I have com 5 detected by the MP.
2.…"
Windows vista 32 bits, dell laptop computer, usb cable, arducopter 2.6 mega
1. I downloaded the latest version of the mission plannner ver:3.17 and installed it. Load the mission planner. I have com 5 detected by the MP.
2.…"
My configuration:Windows vista 32 bits, dell laptop computer, usb cable, arducopter 2.6 mega1. I downloaded the latest version of the mission plannner ver:3.17 and installed it. Load the mission planner. I have com 5 detected by the MP.2. Connect my…
"I got the folowing error :
Failed to download new firmware: System argumentException. The given port name does not start with com/COM or doesn't resolve to a valid serial port."
Failed to download new firmware: System argumentException. The given port name does not start with com/COM or doesn't resolve to a valid serial port."
Hi1. I received a new apm 2.6 mega.2. I have windows vista 32 bits on my dell laptop with .net4 and direct x installed.3. I installed mission planner version 1.3.16 build 1.1.5456.14788 including the drives.4. When I connected the apm via the usb I…
"Thanks, but i am looking for full Android mission planner that i can configure(set, read, calibrate)and test my configuraion through the mission planner. I.e porting the mission planner completly from windows to android."
"Just want to confirm. If i use minimosd board can i connect to it my sj400 camera video out signal and trasmit both my telemetry data and my video through the telemetry radio to my ground station. Does the connection is as shown in reinaldo schema…"
