Hi All,
This is the second TURNIGY TX9 transmitter that I have got into problems!
I am using Turnigy TX9 Transmitter (Mode 1) /8CH Receiver from hobbyking (standard most people get).
- I changed Mode 1 to Mode 2 by swapping pitch and throttle stick spri
Read more…Hi Developers,
In the hope of getting Mission Planner (1.2.59) up and running. Tacking the last traces of errors on 'ArduPilotMega.csproj'. Before posting this, I have read through Dennis Spanongle's post here, though it hasn't helped me at this level
Read more…Hi All,
This is about a few questions that now or later people will ask. About me, I am interested in APM series like most. I think it has done a great job so far. I myself already own a few and have worked in projects with it over the past years.
As m
Read more…Hi,
I found the pinout spreadsheet as in here, but this is for APM 1. Can someone educate me with the pinouts corresponding to APM 2.5.
I would like to know where are the (free) UART pins on this board???
Thanks,
Shyam
Read more…I use APM 2.5 and inbuilt compass and DO NOT use an external magnetometer.
In the mission planner, we have the option of enable magnetometer. Do I check it?? It has the symbol of the external compass. I am using in built compass only. It allows calibr
Read more…Hi,
Can some one tell me how I can see the compass mot (in %) via Mission planner. I would like to place my APM board in such a way so that the interference is the least. Currently it is on the lower most plate right above the PDB/
Any suggestions on h
Read more…Hi,
I bought the:
- Arducopter complete kit (unassembled) from 3DR
- 3S 5000mAh LIPO battery from Hobbyking (here)
Problem:
While building from my Arducopter kit, while soldering/ connecting the PDB, I found that I did not receive a connector compatible f
Read more…Hi DIYs,
I am looking for a Power supply for charging my 5000mAh, 3S 11.1V battery (3 cell) to be used at HOME.
I already have the charger Turnigy Accucel-6 50W 6A Balancer/Charger.
Would like to buy something affordable, from Amazon or similar place, t
Read more…Hi All,
I want to know how can I communicate information stored in a class or struct from ArduPilot (i.e. Arduino) to Raspberry PI or Beaglebone, via serial port or an I2C port from ArduPilot board??
I have a struct or a class that will hold some dynam
Read more…Hi All,
The APM/ Arducopter source code comes with LGPL (Less General Public License) with it. I am talking about both ArduPilot source code (i.e. ArduPlane, ArduCopter,etc) and Mission Planner source code.
Does this mean the source code can be 'freely
Read more…Hi Guys,
I have lost the USB cable that came with APM 2.5 board. I am not sure if it is micro USB cable or a larger one, and any specifications might help me (Type A or B).
I live in Netherlands, can someone point to where I can purchase it online?
Than
Read more…Hi Guys,
I thought to get a new forum rolling for this topic. People have touched upon it in some forums.
Discussions:
1. Streaming real-time camera images from Raspberry PI on the Arducopter
2. WiFi support of data from Rasp PI
3. User extension to Rasp
Read more…Hi Guys,
I have bought the Arducopter kit, and uploaded the v2.9.1 version of code. However, I want to edit the code at quite a few places for my own project with it.
I have used Visual Studio before with APM, however it seems that v2.9 requires a modi
Read more…Hi Guys,
I got my new APM 2.5. I am running it under Windows, arduino 1.01 with VS 2010. I am using ArduPlane 2.68 and 2.67 source code. It builds successfully. However, the problem is:
1) When I open the serial monitor the accelerometers/ gyro keep ca
Read more…Hi Folks,
I want to modify Mission Planner with my own ideas for my application with Arducopter. I saw various posts for Mission Planner source download, but I ain't getting it correct. I know it is open source and developed in C# WinForms, am I corre
Read more…Hi All,
I am looking for best performance LIPO battery for the 3D Robotics Quad-C frame kit (I bought the unassembled version - gonna assemble it this weekend).
My Configuration is (Default 3DR):
4X 10" propellors
4X 850kV Burshless Motors
4X 20A ESCs
Stan
Read more…Hi Guys,
I do not know how many have had issues with 3DR/ udrones customer service. I am quite disappointed with their customer service response:
1. I do not see any customer service number to call/ enquire. I am surprised!!
2. Not completely informativ
Read more…Hi Guys,
Has someone tried (in code) modifying/descaling the loop time and running the arducopter? Currently, it is 50Hz (20ms) for each loop to trigger the motors.
Has anyone tried decreasing the loop frequency/ increasing loop time for saving time o
Read more…Hi @Chris,
I am not sure if someone has asked already this question on forum before. The APM 2.5 has accelerometer, gyros, magnetometer, barometric pressure sensors.
Apart from this I wanted to use 4 IR sensors, 1 sonar and optimal flow sensors (which
Read more…Hi Guys,
I tumbled on a problem last night that made me think the whole day before writing this in forums.
What I am referring to is: Pure Wi-Fi control of Arducopter. Currently, the system supports Transmission and Reception via RC Txm/Rx. The Arducop
Read more…