About

Gender

Male


Location

Paderborn


About Me:

At the moment my 3rd Copter is planned. Model Flying is one of my hobby since 1986. My first Copter i build two jears ago.


Please tell us a bit about your UAV interest

Y6 Copter with pixhawk. Next i plan a 250 fpv quad.


Hometown:

Paderborn


Activity Feed

Sven commented on Randy's blog post ArduCopter 3.2.1 released
"Hi Cala,
thank you for your answer.
Yes i have tested the geo fence function.
That is ok, but the yellow marked is the problem."
Jun 11, 2015
Sven commented on Randy's blog post ArduCopter 3.2.1 released
"Hello,
yesterday i flew the 3.2.1 the first time after a crash with my Tarot 650 last year.
Everything was OK but in PosHold Mode the copter suddenly was pull up the Motors and was going up and away a short time. I have switched back to Stable mode…"
Jun 11, 2015
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Terry 
can you explain a little more what  you exactly modified. Maby can you take some pictures from the modified M8N.
Thanks
Sven"
Nov 18, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"OK i have take a look at the Params in the Log. 
I look like that Mission Planner has write a lot of strange Params to the copter when i take "write params" in Basic an advanced Parameter.

Sven"
Nov 6, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi,today i had a copter crash with 3.2-rc14, but step by step.
I have found the compass Problem / Toilet Bowling from the last post. In the compass wiki http://copter.ardupilot.com/wiki/common-external-magnetometer-for-i... can read " in the…"
Nov 6, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi Christian,
can you tell me the compass orientation you have you set in MP for this M8 Modul, please.

Grüße
Sven"
Nov 3, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Here is the Logfile upload was not ok2014-11-02 16-52-49.log.zip"
Nov 2, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi
today i have test a few things to get the Tarot fying well. 
First i have done load the autotune parameter from rc13 flight. Then i do some Rate Roll P mod with CH6 to get good parameter.  The second thing i have tried, is setting up the GPS/…"
Nov 2, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi Cala
i have tried a autotune a few days ago.
link
But it does not work properly.
sven"
Nov 1, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi stubugs,

thank you for your answer. 
Can you share your param please, so i can see if there something is wrong. 
My tarot 650 has 380Kv 15x5,5 @6S4000 with rtfhawk and NEO-M8N GPS  with HMC5983 from CSG.
Thanks
Sven"
Nov 1, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi,
today i have a flight with rc14 at my new Tarot 650. Stab work well, but loiter and Poshold have toilet bowling. 
After update to rc14 i have done a compass and acel calibration and a compass mot.
Here is a small  log from my last flight
Are…"
Nov 1, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hi,
yesterday i loaded the rc13 to my new Tarot 650 with 6S 380kv 15x5,5 Props and RTFhawk with M8GPS from csg.
The first flight test was ok. Smooth flight in Stablize but toilet bowling in PosHold.  After the flight with about 35% throttle i have…"
Oct 25, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"HI,

i have do some flights with rc7 and test the Function RESET TO ARMED YAW. 
Does not work in RC7 for me at pixhawk"
Sep 5, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Randy, I have flashed 3.1.5 and then again 3.2-rc6 and re-do compass calibration 3 times.Same Problem COMPASS_DEV_ID now is 73225 and COMPASS_DEV_ID2 now is 131594and the Warning PreArm: compasses inconsistent. Thosten is your ID2 now -1 ?"
Sep 2, 2014
Sven replied to Randy's discussion ArduCopter-3.2 beta testing
"Hello Randy,
thank you for the good work.I have updated all 3.2-rc2-rc6 versions to my pixhawk build in china.But now after update to RC6 my compass doesent wok anymore.I have read the about the problems with the COMPASS_DEV_ID in RC5.In RC5 the…"
Sep 1, 2014