"I am really confused now..here is the answer from DIYSTORE
Quote
"The DIP switch is used for disabling different sensors on the board. For example, if you 1001 (1 means the pin is up) then ONLY the gyros sensor will show data and nothing else. If…"
"Hi Guys , New Ardupilot Mega V1.4 replacement board arrvied couple days ago,,,I installed it...New board is working properly..however now IMU is not working..in CLI mode 100 times trying and maybe three times with chance it works and you can watch…"
"HI Guys , I recieved an email from Diydrones store today..Board has issue..I could upload it sometimes and next minute later it was not uploading..It was strange ...They are sending me new replacement board...if you guys face this strange…"
"Hi , final result,, I used soft Tooth Brush and gently rub Atmega1280`s legs ...Board start to work...Three times compiled and serial monitor start to show datas...Fourth time i tried to uploaded the program..Everything was in same condition..Board…"
HI Guys , i bought Diydrones stores new ardupilot mega board ..Also I have IMU shield ..I cant upload the data to the board...I did all recommendation ..still no luck...1)diffrent computer .doesnt work gives upload eror2)compileing is normal..so…