Gender
Male
About
About Me:
Look at www.michael-heck.net ;)
Please tell us a bit about your UAV interest
Flying FPV with Ardupilot Mega as helping hand ;)
Activity Feed
Can anyone tell me how to see that it has a 3D fix?There is only a green LED. - The Stock Mediatek GPS on the APM 2.0 is useless (no Fix or very long Time > 15 min). So i have installed the CN06 UBLOX. It's working, but i don't know before starting…
"No One? Is there a guide how to use and calibrate the Tracker? Is a compass needed?"
I can't find any Info to get Ardustation working with my 360 degree Gws Servo.What is to do to start Tracking?
"That was also my Problem!"
"Parameters are standard and in Stable Mode its ok but Loiter or RTL the copter want to commit suicide. Any idea?"
My Problem is, that my big Arducopter don't stay in Loiter Mode. It flyes away in one direction with more an more speed. GPS has a 3D fix. Same Problem in RTL. It don't gets its Position and hides away.IMG_1140.JPG
"now i've tested it on 3 PCs with 2 different FTDIs. Same result."
"I use exactly the same FTDI for programming the Arduino Pro mini 5V for my WiiKopter."
"Yes, tried both, with external and without external power. In the second video you see, that when its external powered the LCD is off."
"Yes, i can. Ardupilot, Arduino mini, no problem."
"My Ardustation won't work. I can't upload any code. Its the 2nd Ardustation with still the same error.https://www.youtube.com/watch?v=vamlA0fF_VA and https://www.youtube.com/watch?v=Yt3ddhvP65o"
"Same error here, can't upload to Ardustation. FTDI is ok, i can upload to Arduino Mini.
Board is set to Duelemanove / mini 328. Upper left LED is on, lower left blinks, lower right is off.
"
Board is set to Duelemanove / mini 328. Upper left LED is on, lower left blinks, lower right is off.
"
"I have now my second board but still the same Error:
avrdude: stk500_getsync(): not in sync: resp=0x00avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x54
Upper left LED is on, lower left blinks. It is supplyed only by USB. I can…"
avrdude: stk500_getsync(): not in sync: resp=0x00avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x54
Upper left LED is on, lower left blinks. It is supplyed only by USB. I can…"
"Now it works greate!!!
Edit for embedded video"
Edit for embedded video"
"By turning the potentiometers the Display shows two lines of Black Stripes (1st, 3rd). But i still got:
Binary sketch size: 11970 bytes (of a 30720 byte maximum)avrdude: stk500_getsync(): not in sync: resp=0x00avrdude: stk500_disable(): protocol…"
Binary sketch size: 11970 bytes (of a 30720 byte maximum)avrdude: stk500_getsync(): not in sync: resp=0x00avrdude: stk500_disable(): protocol…"
