UTM Coordinates format?

Hi everyone,

         I would kindly ask you if there is (or will be) a possibility for choosing between position formats?. At least to swith between geodetic (lat/long) and UTM coordinates?.

Maybe this is a stupid question and I already may choose, bu

Photogrammetry with A2 flight controller, Z15 gimbal

We operate a DJI S900 with A2 controller, Z15-N gimbal and 2.4 GHz Data Link dedicated to photogrammetric surveys. Our experience, having tried a number of alternate configurations, is that UgCS will not trigger the camera. The Gimbal Control Unit 'S

UGCS telemetry logs save location?

So I can export or make a backup copy in a different location. Thanks!

Why no Yaw in Telemetry?

Hi guys,

As Pitch, Roll and Yaw are three basic parameters that every pilots get taught about at flight school, I'm surprised it doesn't appear in any of the telemetry readings from the EMU-COPTER. Is there something different about drones that means

2.4ghz DJI UGCS & 2.4ghz taranis x8r . is it safe to use both?

2.4ghz DJI UGCS & 2.4ghz taranis x8r, is it safe to use both? 

Or is it better to just use 2.4ghz DJI gcs w/ UGCS?

Any UGCS user have try this two 2.4ghz for RC & 2.4 ghz UGCS both at the same time ?

UGCS 2.11 Problems / Can I do tablet rollback?

We bought a new tablet and are now forced to update to UGCS 2.11. After using it for 2 jobs it has some terrible bugs that need worked out. We are getting a very bad latency issue and the drone is not even remotely close on the screen to were it is i

UGCS Compatibility: DJI M600 Pro + Ronin MX + Sony A7R (ii)

Updated droplets for UGCS 2.11

Before I try, are there updated cnverter_master droplets?

Delay time between consecutive shots in survey missions

Hi, guys,

Recently one of our customers discovered an interesting fact while doing a photogrammetry survey using DJI A2 autopilot system - if the time between consecutive photos was set at less than 2.1 seconds, not all of the photos were taken. Despi

In case of lost drone, best move ?

Hi everybody, I am just preparing for the day I am gonna crash my drone^^.I see 2 possibilities to find a lost drone.1- using the latest received GPS coordinate before the crash/lost of connection. But in UgCS I am not really sure where this data is

Save flight plan and load into multiple flights?

For post-processing LiDAR flights, it is required that I start and end each flight with 3 figure eight flight patterns. Is it possible for me to create a custom shape to enable doing this easily each time I plan a flight, such as the circle that is a

Trouble initiating 2nd mission after one completes

Using an m600, I flew a nice mission using the UGCS beta app (android). However following landing UGCS disconnected from the drone, and I was not able to get it to connect again. I restarted the app a few times, turned off UGCS on my PC and restarted

How do I enable Telemetry for Emulator

I would like to record telemetry for the quadcopter emulator, however the docs say that recording is disabled by default on the emulator. How can I enable it?

Thanks,

M600 rotating between points after stop and turn

Hello,

I've been playing with UGCS's area scan feature, and I'm having issues after turning at any corners. I have the turn type set to Stop and Turn (I've tried adaptive bank too), but the issue is the M600 is not facing forward after making the turn

Telemetry player - big amount of data stored

Dear Technical Support Specialist,

We are having issues with Geotagging in Telemetry player, because we have too many trajectories stored in the system. Can you please tell us where are the trajectories stored and how to safely erase them.

Thank you fo

How to save current dorne position, return to home, change the batt then resume the mission to the last save position?

How to save current drone position, return to home, change the battery then resume the mission to the last save position?

Maybe we can hover the drone for a few seconds to get accurate gps location before returning home.

I cant figure it out how to do

Return Home results in copter flying to max possible altitude over home point

I've now experienced (in emulator) that the copter will fly to max allowable altitude once it returns home following pushing the 'return home' button. This would obviously not be desired if the RTL was due to the battery being low for example. Any id

Terrain and return home and joystick control

As far as I can tell, a copter or plane using UCGS will fly directly into a hill if return home or joystick control is used. I had expected it would follow terrain as it does when creating an initial waypoint or survey. This is a serious risk, especi

Ugcs with inspire 1 takeoff and landing problems

I just got my first flight test using ugcs with inspire 1 yesterday. I follow the previous post that first uses the DJI GO to takeoff the craft and then switch to ugcs and do the planning works. It works fine with all the waypoint and POI tests.

But I

Add building KMZ file error

I am struggling with how to add building from KMZ. I developed 3D model with agisoft photoscan and export it as KMZ file. Then, do the process as mentioned in manual to add this model into ugcs by browsing the file located in my same computer. Howeve