Gender
Male
About
Location
Distrito Federal
About Me:
Manager of cartomex.com
Please tell us a bit about your UAV interest
Aerial Pictures, video and LIDAR
Hometown:
Mexico City
Activity Feed
Hi, can anybody tell me what is the best stable Arducopter Multirotor firmware for Pixhawk 2.1 with Edison ?Thank you
"Hi Andre, thank you very much for your answer.Regarding tests: In test 1 i will need a amperimeter like attached, and test in each arm ?
In test 2, you can see the original ESC…"
In test 2, you can see the original ESC…"
"Hi Andre, and thank you very much for your answer.
Can you please recommend me powerful or best ESC's for my hexa? I' currently using Hobbywing XRotor PRO 50A.I ask they,but they say ESC are not the,problem, i can accept any brand you recommend for…"
Can you please recommend me powerful or best ESC's for my hexa? I' currently using Hobbywing XRotor PRO 50A.I ask they,but they say ESC are not the,problem, i can accept any brand you recommend for…"
"Hi Andre, how are you?I changed motor and ESC #4, and i loaded 3,8 kg, using 2 batteries to simulate the payload (to dont load the lidar and cameras, please see attach).
Today fly at 2800 meters in a field test and again same problem, when i see…"
Today fly at 2800 meters in a field test and again same problem, when i see…"
"Hello, Andre, and thank you very much for your answer.Can you please tell me how you identify this ? or how can i check motors performance or fail?
What log values i need to check or compare?
I will replace this for a new motor, and check/replace…"
What log values i need to check or compare?
I will replace this for a new motor, and check/replace…"
Hello all, I'm flying a Tarot hexa over a forest, in a mountain region at around 3000 meters altitude After some time flying, device start to oscillate in altitude, down , up, down up, and yesterday crashed in a cup of a 30 meters pine ( i…
Hello All, i'm working in a bigger Tarot hexa, the TL6X001, i have the Tarot 340 kv motors and Hobbywing 40A ESC 2-6S no BEC. (pls see attached img)After flying 20 minutes (without payload) escs are really hot , yesterday i burned one in flight and…
"Thank you very very much!
Cristian"
Cristian"
Hello all, how are you?I trying to configure the power module to right set the POWER FAIL SAFEI changed to Attopilot 180, because i have 22,000 6S battery.Starting device, and with no arm (only showing in MP) my battery percent remaining is…
Dears friends how are you?I'm working in payload tests with TL6X001, i need to install sensors on it and my goal is to load between 2-3 kg, and fly acceptable 10-15 minutes missions.Ok, my hardware is:Frame: Tarot TL6X001 Hexacopter Motors: 6 x…
"Hello, can you share me the scripts or the way to resume the mission after change battery in auto mode?
Thank you!
Cristian"
Thank you!
Cristian"
I'm working in panorama 360 panorama project, using a 6 x Sony a5100 and 19mm 2.8 f lens.Anybody have experience in to shoot 6 cameras at same time using Pixhawk ? i have the cableto shoot one camera from pix.I assume that the exif geotag…
Hello, all, can anybody tell me how really i can start the mission?I write a simple mission, save to disk and copter eeprom, change to auto modeand in ACTION: MISSION_START -> Do Action.Nothing happen.I try arming, or changing to auto from RC,…
"HELLO ALL , i can accept boat consult for this project.
Regards!
Cristian"
Regards!
Cristian"
"Hello Ben, and thank you for your answer!
Regarding bait , i need to carry the bait and hook 500 meters inside sea, release this, and boat back to coast. First i will do this manually with RC, an later i'm thinking in to use px4 and GPS for all…"
Regarding bait , i need to carry the bait and hook 500 meters inside sea, release this, and boat back to coast. First i will do this manually with RC, an later i'm thinking in to use px4 and GPS for all…"
