"Thanks, will add to requirements."

"UgCS App and DJI GO cannot run together simultaneously. You have to completely exit (kill process) one before launching other. On some Android devices unfortunately even restart might be required.

As for camera horizon/zenith setup that needs to be…"

"I am sorry for your bad experience. Thank you for your honest feedback and identification of issues we need to solve to improve the support process. "

"Get some Wi-FI access point and connect both PC and Tablet to it. Even small travel ones will be ok.
Like this one, though have not tested particular one.Link
For our field tests we also use this approach by having separate router for all devices to…"

"Vasselin wins the guessing game! Close to the end of last year we hit the 40 man years of development for UgCS. If to add also support engineers time since we went commercial  and management would be even more. Part of the work have gone into…"

"UgCS ONE has photogrammetry tool. https://www.ugcs.com/en/ugcs_licences"

"Two weeks is usually enough time to get over learning curve and understand where limitations are within UgCS and where in drone. To see how UgCS squeezes out more from, let say DJI, than you can get with native software. 
There is also option to…"

"Will keep open guess game till 1st of March. Closest guess wins, thus there will be a  winner. "

"For UgCS Pro I am accepting refund requests within period of two weeks from purchase with no questions asked."

"There are options to put "action on each waypoint" that means camera will be triggered by waypoint for each picture. Will add huge amount of waypoints, cause drone to stop at each, likely will run into DJI limitation of number of available waypoints…"

"Photogrammetry rarely is something one does out of hobby. If it helps with something one is doing as business it is good to share the spoils. For other useful tools even for hobby we all are spending far more than 65$ asked for UgCS ONE.
For the…"

"No, it should not be and most of the time it is not as all connections of the drones are happening automatically.
As for not executing mission, have you set the drone to automode according UGCS Manual for…"

"Before support comes to work on Monday, please try following.
On tablet go to Menu, scroll down to very bottom. There you will see IP and UgCS Connection port. Write down those values IP and port.
Go to UgCS on PC, open Menu->Configuration->VSM.…"

"Hi, Please check your IP and subnet for each device to ensure they are really on same network. If that is not helping please write to support@ugcs.com"

"It increases waypoints to have better precision.
99 is limit set by DJI. Workaround is to fly most of them, then stop and restart from place where you left it. UgCS supports such feature. Select waypoint from which you want to continue in the middle…"