About

Location

Jersey City, NJ


Please tell us a bit about your UAV interest

i like making rc planes, and the fact that they now can fly autonomously makes it even more interesting


Activity Feed

electrolics inc replied to electrolics inc's discussion ugcs open license photogrammetry disabled? in UgCS
"36 is a huge number

id go with 20 man years"
Feb 19, 2017
electrolics inc posted a discussion in UgCS
Hello allI've testing the UgCS for photogrammetry, but recently its asking me for activation. Why have they disabled photogrammetry tool in open license?I now have shifted to testing out the Pix4d capture which is working out quite well.any way to…
Feb 19, 2017
electrolics inc replied to Jay Baldwin's discussion DJI M600P Configuration Variables and UgCS in UgCS
"Important discussion, I am too interested to learn more about M600 with RTK to fulfill survey needs.
Firstly, how is the photo tagged with the M600 DRTK? "
Jan 2, 2017
electrolics inc replied to AJ152's discussion Reach RTK vs Piksi?
"thank you for your reply @kiki boy

1. Please share your experience with Reach.
2. Thank you, so drotek is out.
3. Reach can be used in PPK mode, right? What accuracy (x,y & z) do you get with no GCPs and just the recorded feedback of the camera?
4.…"
Oct 14, 2016
electrolics inc replied to Sergej Kolesnikov's discussion For Sale: MicaSense RedEdge Multispectral Camera in Agricultural UAVs
"Hello

Please let me know your demand. Thanks"
Oct 13, 2016
electrolics inc replied to AJ152's discussion Reach RTK vs Piksi?
"I was willing to buy the Reach RTK, and I am quite new to these RTK and PPKs. To bad these are not fully workable with pixhawk. Really interested to know more about it rather than spending a lot of time an money.

Questions on my mind:
1. Which cost…"
Oct 13, 2016
electrolics inc commented on Chris Anderson's blog post Affordable new RTK GPS, designed for Pixhawk/APM
"Hello,
Does it come with Pixhawk cable? And ready to use with Pixhawk?"
Mar 6, 2016
electrolics inc replied to Abolo's discussion What different between ( Absolute , Relative , Terrain ) Alt in MP ? in ArduPlane User Group
""Altasl" is 100% baro by default. And I've checked parameters the ALT_MIX is set to baro. When the plane moves/stays on ground over the span of minutes the "altasl" value jumps way high while alt stays almost the same. The plane flies OK and the pix…"
Mar 1, 2016
electrolics inc replied to Abolo's discussion What different between ( Absolute , Relative , Terrain ) Alt in MP ? in ArduPlane User Group
"Thanks, but that I know. What I meant to ask is that is this gps or baro reading, because "altasl" (100% baro) changes too much (1-9m) while on ground and alt reading remains almost same, very slight change (0.01- 0.10m) ."
Mar 1, 2016
electrolics inc replied to Abolo's discussion What different between ( Absolute , Relative , Terrain ) Alt in MP ? in ArduPlane User Group
"so what the value "alt" indicate under the status tab?"
Feb 29, 2016
electrolics inc replied to Abolo's discussion What different between ( Absolute , Relative , Terrain ) Alt in MP ? in ArduPlane User Group
"ALT_MIX is default i.e 1 so this is showing 100% barometer, Does the mission planner show GPS alt under the status tab?

I know I'll have dig into the dataflash log to find GPS alt, but playing back a telemetry log is easier in the mission planner…"
Feb 25, 2016
electrolics inc replied to Abolo's discussion What different between ( Absolute , Relative , Terrain ) Alt in MP ? in ArduPlane User Group
"Hello,
I am looking for some answers regarding altitude in mission planner.

1. What does the 'altasl' (file attached) value stand for? is it the altitude of GPS only or does it represent Barometer only or mix of both?

2. Where in mission planner…"
Feb 25, 2016
electrolics inc commented on Joseph Aletky's blog post 134km/83.5 Mile, 4 hour flight with our Skywalker
"Great job you guys!Sorry to bring this old post up againPlease share the specs on this, batteries and stuff. Thanks"
Feb 20, 2016
electrolics inc replied to Scott Pritchett's discussion Does anyone have a Dashware profile/tool for APM:Copter or APM:Plane?
"thank you for testing the bin file

Did you choose the 'APM Copter' profile or the just 'APM'? because I was using just the 'APM' because this is meant for arduplane."
Feb 20, 2016
electrolics inc replied to Scott Pritchett's discussion Does anyone have a Dashware profile/tool for APM:Copter or APM:Plane?
"bin file click here"
Feb 19, 2016
electrolics inc replied to Scott Pritchett's discussion Does anyone have a Dashware profile/tool for APM:Copter or APM:Plane?
"yes there is and it contains the right info"
Feb 19, 2016
More…