Max Patissier
  • Male
  • Montevideo
  • Uruguay
Share

Max Patissier's Friends

  • Ellen Zhu
  • Jacob Cereteli
  • max may
  • Sven Hoffmann
  • Artem Kholodkov
  • Pierre
  • Gonzalo Garat
  • Thanh Nguyen
  • Gustavo Togeiro de Alckmin
  • Hugues
  • LanMark
  • Carlos Batista
  • Carlos de Mula

Max Patissier's Groups

Max Patissier's Discussions

Motor still running after disarm (when motors or ESC are hot)

Started this discussion. Last reply by Max Patissier Apr 13, 2016. 3 Replies

Hi to allwe have a strange behavior on one of our drones. We are manufacturing drones, so this is not the first one....Quadcopter 500mm, Pixhawk, v3.3.3,  ESC 30A, Turnigy motors, custom distribution…Continue

Land function

Started this discussion. Last reply by Max Patissier Feb 22, 2016. 2 Replies

Hi to all,I would like to be sure how the land function is working.On the documentation, it say that it is using Alt hold function.But if I try to switch from Stabilize to LAND, with wind, my quad is…Continue

my first big flight away

Started this discussion. Last reply by Max Patissier Dec 17, 2014. 8 Replies

Hi to allwell, custom H alu frame, APM mini firmware 3.2 - GPS Ublox 6h, Qbrain 4x25, moteur Ipower 850Kv.I start the quad this morming with auto mission 800 m. Wait for 7 satelites - I usualy get…Continue

Tags: mini, apm, away, flight

Failsafe en auto mode

Started this discussion. Last reply by Todd Oct 14, 2014. 4 Replies

Hello everyone2 accidents today and maybe same (human) error.I was trying long auto mission - 2 km from home - and for all the 2 missions, when the drone is going back, I get an RTL and a stabilize…Continue

 

Max Patissier's Page

Latest Activity

Max Patissier replied to Chris Hardwick's discussion Pixhawk apparently losing ESC calibration data
"thank you for you advice Emin. We get this one : http://www.readytoflyquads.com/rtf-escez-30amp ; Cheap but hours of flight without any problem. Except when we used it with pixhawk...."
Sep 13, 2016
Max Patissier replied to Chris Hardwick's discussion Pixhawk apparently losing ESC calibration data
"we have the same behavior : with APM series, ReadytoFly ESC 30A work very well. With Pixhawk, it is a nightmare. Some time working, some time not. We change them for Afro series : no more problem. We spend almost 1 week to understand  - no way…"
Sep 12, 2016
Max Patissier replied to Jean-Jacques's discussion Tuning parameters for thermals
"bravo les gars !"
Sep 12, 2016
Max Patissier replied to Omer's discussion WiFi Telemetry with Cheap ESP8266
"we are working on it..... the idea is to have radio link in the country and use it as relay."
Jun 30, 2016
Max Patissier commented on Sven Hoffmann's blog post FPV & R/C over multiple public cellular networks
"Awesome ! we are trying to do that here in Uruguay with quadcopters. Having UAVs ready to fly in case of emergency in the country. We will post our results."
Jun 17, 2016
Max Patissier commented on Andy Little's blog post A new use for an APM2.x...
"@Andy : we already did it.... that is very boring.... more interesting, it is to follow horses racing using APM to mesure speed, acceleration, step size and heart beat. We are also monitoring race boat (speed, inclination, waypoints, etc... with…"
May 10, 2016
Max Patissier commented on Andy Little's blog post A new use for an APM2.x...
"@Andy we use the APM to monitor the sheep head movement. Like that, we can understood how the animal is eating. The idea (verified) is that the way is eating give us the quality of the grass. And we can decide to move or not the animal group.…"
May 8, 2016
Max Patissier commented on Andy Little's blog post A new use for an APM2.x...
"APM driven sheep.... we use it to track sheep and study his behavior.... gps, accel, compass, temp..."
May 7, 2016
Max Patissier commented on Thomas Stone's blog post GPS-denied Position-hold w/ 3DR Solo
"The idea is to use a cheap laser meter to estimate the height and make a mission with one WP. About inverting the code, we should use take off+loiter instead of land, no ?"
May 4, 2016
Max Patissier commented on Thomas Stone's blog post GPS-denied Position-hold w/ 3DR Solo
"hola Thomas, we have a very nice project with this kind of function : we need to inspect fire detector inside plants roofs in very high altitude (like 10 meters). I was thinking about using your beacon and put it right below the sensor and ask the…"
May 3, 2016
CNTurbo commented on Max Patissier's video
Thumbnail

Cloudstat - F450

"Can you tell me what the fastest speed for the F450? I am caculating a mission which a UAV fly  with a 50-km-long road and the time  to need. I think the F450 might be a right one to choose.  So could you tell  me about the…"
Apr 29, 2016
Max Patissier commented on Hugues's blog post Sub One Kilo project
"hehehe si we always need talents ! send me a CV on my PM... (en français pas de pb)"
Apr 27, 2016
Max Patissier commented on Hugues's blog post Sub One Kilo project
"well, in Uruguay, we are more likely with our new law. There is no limit (well, below 25 kg) but if you fly for business, you need to get a licence. And a private pilot licence for more than 260 kg. We are going to make a drones base for…"
Apr 27, 2016
Max Patissier replied to Max Patissier's discussion Motor still running after disarm (when motors or ESC are hot)
"we change RC3 from 880 to 867. The problem is almost gone but I still do not understand exactly why this problem occurs today. If someone has a good explanation... "
Apr 13, 2016
Max Patissier replied to Mikko Korhonen's discussion Vibrations 3.3
"tip : try also with AltHold and Loiter. Vibrations usually are low at stab mode."
Apr 13, 2016
Max Patissier replied to Tom Kopp's discussion Pixhawk with low KV motors unstable/crash
"yes. Start at 0.15 and I bet that you will not be below 0.14"
Apr 12, 2016

Profile Information

Please tell us a bit about your UAV interest
H4 APM2.5
Hometown:
Montevideo

Max Patissier's Videos

  • Add Videos
  • View All

Max Patissier's Blog

Cloudstat Control Center - DroneCode + Raspberry Pi

Posted on March 14, 2016 at 7:00am 3 Comments

We are an Uruguayan company manufacturing drones for security and agro market. As 99% of problems are human error, we decided to fly our drones without human action ! The objective is quite simple : Help use of drones offering the simplest way to fly it.

Thank to DroneCode (and a lot of work...), we have designed a black box with 2 buttons : 1 to arm, 1 to…

Continue

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service