Hi,
I am attempting to put in a closed loop entry for T3 round 6 based around ArduPilot 2.6 code and FlightGear.
The model currently navigates directly to all waypoints, except those lying to the North of the previous waypoint. Here it seems to fly on
Hello guys,
I have been working on my Ardupilot project now for over three months, and have run into many obstacles along the way. A lot of my problems were simply due to inexperience and were solved by help from many of you here on the forum.
Howeve
Read more…Using v1 shield, EM406, FMA sensors, no throttle connected the board, twin-boom plane, on FBW and Auto
Tried out this version for the first time today, two things I picked up on - my plane still seems to climb endlessly as there doesn't seem to be muc
Hi,
High Guys,
As total newbe, I started to understand sensors and programming Arduino in combination with Processing. So far I can read speed (precisely) with a 10 hpa (mbar) diff press sensor. This allows speed measuring up to 130 km/h. Temperature and
Read more…Ok. This is what I have setup. I have the arduIMU v2, the ftdi cable, and the newest ublox from the diy drones store. After I hook the gps up with the cable to the arduIMU and then power it all with the ftdi cable, then I run the labview and the util
Read more…Hi. hopefully someone can help me with assembly of
ArduStationn
i cant get my ground station to work/ turn on).
i have extra pieces left.
i get nothing on the LCD
no LCD power.
not sure what lights should turn on when i plug it in. but the red light is
Hi all,
Can someone help me with setting up the mode switch.
I'm using a MX22 with a spektrum module.
I have run the Radio tester and servos in nuetral position about 1500.
When I run the mode switch test, nothing happens. MUX led is always off.
STAT Led
Read more…What is the best hand held transmitter RC system compatible with spektrum AR6400 receiver ?
Read more…I know that some consider the predator/reaper to be an unstable platform, however, flight characteristics aside, I've been looking at http://www.nitroplanes.com/mq9.html the new 98" wingspan MQ-9. I'll be adding either a nano-itx pc (components strun
Read more…Ok I am confused.
pinMode(2,INPUT); // PD2 - INT0 - Rudder in - INPUT Rudder/Aileron pinMode(3,INPUT); // PD3 - INT1 - Elevator inRead more…
A board that provides configuration assistance for the combined use of ArdupIlot and Copilot II
Read more…Hi,
Does anyone out there know about this project?
Based on the sample data provided by Loris I have written some code to produce an Allan Variance plot of the data. The program source code is ISO C++98, and should compile with any standards-compliant compiler. G++ 4.4 tested, I expect MSVC 2k8 or hi
Read more…I Have an Ardupilot (red board), with a shield (blue one). I can't loadcode with the shield attached. I can monitor the serial data, but Ican't load code. All the LED's are working on both boards but I have toremove the shield to load the code. Is th
Read more…Hi all,
Ok I've spent most of the day on this and I'm still struggling so am going to ask here.
I want to use an interrupt to take information from a digital pin on the Ardupilot.
My questions are:
What interrupts are used by Ardupilot, or, more importan
hello...
In indonesia we live in disaster potential area. Tsunami and the latest earthquick just few of them. Sadly the goverment has limited resources handling those disaster. In many cases the victims could not get help because road acces is broken
Hi all.
I found a few movies you made at youtube, so it got me interested right away :)
But i have a few questions whit the electronic...
In your drones, do you use real time cameras? so you can navigate by looking on the screen, not on the drone? I ama
Read more…