I was going through Jordi's code and he talks about multiple "tabs". I've used Visual Studio (C#) for a couple of months, and have wanted an IDE that will let me do something similar with my Arduino, particularly with Jordi's code. But how do you do
Read more…I'm building a UAV for a project. I have decided to buy the Attopilot for the autopilot system. I'm very new to R/C and i'm not sure what all to be looking at in terms of power supply, R/C reicevers, servo's and so forth. Can someone please help?Than
Read more…I'm considering buying the Attopilot autopilot system and i'm not sure what and how many batteries to buy. Can someone please help?Thank you
Read more…Hi, anyone have it ?i want get one but only if it could be possible use it for UAV/FPVany one know how difficult is to hack it?http://www.chinavasion.com/product_info.php/pName/gps-receiver-usb-adapter-for-computers-netbook-laptop-umpc/
Read more…hi all!1.how should i interface fv-m8 with pc, what all i need to buy along with fv-m8 to get the data displayed in minigps or gps locator utility. circuit diagram is appreciated.2.i am using avr atmega8 microcontroller for extracting data from fv-m8
Read more…I wondered if anyone had tried hacking a cheap bluetooth GPS receiver? There's no lack of them on eBay and with a bit of tinkering it should be possible to disable the bluetooth portion (in case of 2.4GHz interference) and find some kind of serial bi
Read more…I have noticed that several posts discussing different capabilities seem to use the same pin locations on the main board (e.g. ArduPilot Shield and wireless telemetery).If a configuration utilizes the ArduPilot Shield can the system still support wir
Read more…I've been working on some UAV stuff and thought I would share a little bit about I'm doing, and also see if anyone would be interested in getting together and working on a joint project.My end goal is to do a solar-powered, high altitude, high speed
Read more…When i first running test code the ardupilot(with out connect to gps) was very hot!! .and when i connect to gps 406A the gps is not lock and the servo control by transmitter and turn to a little right ,GPS LED blinking ,mux off ,stat on ,power on was
Read more…I'm totally new and unexperienced here, so forgive me for acting like a fool.Has anyone ever heard of UAVs acting like barking dogs to manage livestock from the air?I can see highly manoeuvrable RC blimps (eh, http://www.hyperblimp.com ) gently pushi
Read more…I am trying to build a quadcopter using an arduino duemilanove board and a 6 DOF Atomic IMU from sparkfun. So far have got stuck on how to get readings on my arduino using the Atomic IMU. Can somebody pls tell me how to talk to my IMU. PLS help faaas
Read more…Hey everybody!I have planned for a project with my school for my final year. Basically the idea is to make a 4 channel transmitter (3 axis+ 1 throttle). It would be tilt sensing, and the throttle would be a trigger like the trigger on an Xbox360 cont
Read more…i load ArduPilotNE to borad the motor keeping runing.
Read more…I had just purchased a FailSafe MUX board. However, I am not sure of the pins and their usage in the board.Please advise.
Read more…Hi everyone,I want to build a hydrofoil sailing boat based on this hydrofoil windsurfer, but to use the UAV DevBoard and moving weights to stabalize pitch and roll instead of the riders body mass.I have only looked over the website breifly and am una
Read more…I wish to develop a platform for geophysical work. The problem is that suitable geophysical receivers are copper coils with a weight in excess of 5kg - with ancillary electronics the total payload would likely be 10kg.In addition, an air coil receive
Read more…I am new here and i want to built a 3ch RC car to for using ArduPilot 2.1.So do I need to change code to Run the car? Do i also need XY sensor and Z sensor ? (sorry my English is not good)
Read more…Hi, i have recived my ardupilot hardware today.I have looked on the homepage but i can not find a instruction how to complete the construction (where to solder the gps, the usb interface the shield, servos ec.) I found a instruction how to solder the
Read more…hello ,i'm very new with C programing and arduino environment but i found out how to use the 2.2 soft with the locosys GPS (NMEA) so i wanted to tell you how i've done:in the Ardupilot_easystart_v22 tab change that to get nmea mode:#define GPS_PROTOC
Read more…I have seen the Quadrocopter the first time in Hannovermesse and it became my new passion, I want to build one for my graduation project. i'm a fourth year mechatronics engineering student living at the moment in Germany.I'm facing a huge problem in
Read more…