Has anyone else tried one of these out? I bought one just for something to play with and its pretty much a scaled down FX-61. In fact most are listed as FX-61 845mm planes but lately the "wing wing" (Which seems to be identical) has been popping up o
Okay, So I have my stock setup, but I also have a bunch of 2217 1050kv Turnigy motors which is a pretty dependable, and Is my Go to motor for allot of things. I also have a 40 AMP Blue series ESC (Very Nice) and an Extremely nice Turnigy SK3536 1400k
First off Im fairly new to R/C planes, but not to electronics or the Ardu-Family. So I started with a bixler, but as soon as she was done I ended up selling it (without it ever being flown) but I had it pretty tricked out, and it got my feet wet (btw
I have got a fx-61 some days ago, and I am having problems with the settings for taking off in auto mode. The plane doesn't keep its heading, always turn right and up, so it gets down inmediatly. Have you tried to take off in auto mode?, if
Thought it would be a good idea to have a place to share Phantom APM config files. Since my FX-61 just got finished and is now waiting for its maiden I can only share my config that I thought I would start with...
My flight plane flight was yesterday after initially only building quadcopters. Having seen many photos and videos of "chopped fingers", I decided against using a normal hand launch and tried hand-launching with a side grip or turning on the e
Still working on a tray to mount all of the electronics on. What is not pictured is is 2 voltage monitors for the lipos, and the other battery. If anyone has any suggestions I am all ears. Hopefully the electronics on the top that close to each other