Please tell us a bit about your UAV interest
thermal
About
Activity Feed
"hi
yes most definetly can be done
1) i use still images2) 80m3) yes and can be done4) correct5) 2 - 3 hours we can fly comfortably6) yes we can use some sensors but ideally you would want to use human intelligence here for the autonomous flight…"
yes most definetly can be done
1) i use still images2) 80m3) yes and can be done4) correct5) 2 - 3 hours we can fly comfortably6) yes we can use some sensors but ideally you would want to use human intelligence here for the autonomous flight…"
"hi
as Chris Anderson said you need to look here http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu...
basically you need to put a tick in elevon config on each option to see which will make a difference, i had the same issue."
as Chris Anderson said you need to look here http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu...
basically you need to put a tick in elevon config on each option to see which will make a difference, i had the same issue."
"excellent thanks, really helpful.
just 1 other thing, WP13 just a dummy or extra and wont be executed i guess ?i posted on the arduplane group this http://diydrones.com/group/apmusergroup/forum/topics/flying-continu...
but basically i was trying…"
just 1 other thing, WP13 just a dummy or extra and wont be executed i guess ?i posted on the arduplane group this http://diydrones.com/group/apmusergroup/forum/topics/flying-continu...
but basically i was trying…"
"how did you autonomously fly that circuit continuously ?"
Hii am looking to have my fx-61 fly a waypoint circuit continuously until the battery voltage drops to a certain value which then executes a RTL/RTH but actually follows like a waypoint path to the RTL/RTH to do a landing.is this possible ? has…
Hianyone know a place to buy FX-61 spares, i am looking for a motor mount.regards
"ok i managed to solve this problem
by setting the ELEVON_OUTPUT to 4 under CONFIG/TUNING -> FULL PARAMTER LIST
http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu..."
by setting the ELEVON_OUTPUT to 4 under CONFIG/TUNING -> FULL PARAMTER LIST
http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu..."
"ok i managed to solve this problem
by setting the ELEVON_OUTPUT to 4 under CONFIG/TUNING -> FULL PARAMTER LIST
http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu..."
by setting the ELEVON_OUTPUT to 4 under CONFIG/TUNING -> FULL PARAMTER LIST
http://plane.ardupilot.com/wiki/arduplane-setup/first-time-apm-setu..."
"ok so i followed instruction step by step a few times but still the result is the same.
i have an internal compass in the apm 2.5"
i have an internal compass in the apm 2.5"
hii have an issue i am not sure how to solve. the problem is the pitch and roll reversed issue.on the mission planner if i pitch or roll it shows correctly, but if i look on the plane it is reversed. anyone seen this problem before or know how to…
"something i have come across now which i cant seem to solve is the pitch and roll reversed issue.
on the mission planner if i pitch or roll it shows correctly, but if i look on the plane it is reversed. anyone seen this problem before or know how…"
on the mission planner if i pitch or roll it shows correctly, but if i look on the plane it is reversed. anyone seen this problem before or know how…"
"so basically i determined it is not a 8fgs issue, if i connect directly to the futaba rx everything is working as it should. it seems to be the apm which is causing the problem."
"hi
how can i use your param on my fx61, how would i load it ? do i need to do it manually ?
answered - ok figured it out CONFIG/TUNING -> FULL PARAMETER LIST -> LOAD"
how can i use your param on my fx61, how would i load it ? do i need to do it manually ?
answered - ok figured it out CONFIG/TUNING -> FULL PARAMETER LIST -> LOAD"
Hii completed my build of the fx61 but i am having a problem with setting up my futaba 8fgs with my fx61.could anyone who done this please offer advise on the correct process ?so far i have set the model to "airplane" and "flying wing" with 2 ail…
