Gender
Male
About
Location
Houston, TX
Please tell us a bit about your UAV interest
It's mainly for research purposes at the moment, but it could evolve into something bigger.
Hometown:
Houston
Activity Feed
"Is Mission Planner discontinued? @Andre K, it seems like you are implying that MP is the problem, and that I should switch to APM planner 2. I just want to make sure that I don't use MP if no developers are going to be working on it anymore."
"OK I'll see how well it works. Is it just like Mission Planner? It took a while for me to get proficient with MP so I just want to make sure I can have quick, smooth transition between the two programs."
"No I am not getting those errors, but my accelerometer calibration keeps failing with Arduplane V3.5.3 and V3.5.0. I went back to V3.4.0 and it seems to work just fine.
http://diydrones.com/forum/topics/pixhawk-arduplane-v3-5-3-accelero..."
http://diydrones.com/forum/topics/pixhawk-arduplane-v3-5-3-accelero..."
Hello fellow pilots!I am currently having problems with my accelerometer calibration when I upload ArduPlane V3.5.3 onto my Pixhawk. I am also using Mission Planner 1.3.37. When I upload ArduCopter, I am able to move through the calibration steps…
"Oh OK, thank you for the clarification!"
"@Andrew Tridgell
Are you sure the correct LOG_BITMASK number is 65535? I have here:
http://ardupilot.org/copter/docs/parameters.html
That the number is supposed to be 655358. Is this correct? Also, I have accidentally put the 65535 number as the…"
Are you sure the correct LOG_BITMASK number is 65535? I have here:
http://ardupilot.org/copter/docs/parameters.html
That the number is supposed to be 655358. Is this correct? Also, I have accidentally put the 65535 number as the…"
"OK I thought it might be that the SD card was corrupted. But I placed the micro SD card from the Pixhawk into my computer (via a SD card adapter) and I was able to access the contents of the disk with no issues. I then put it back in my Pixhawk and…"
"I know that they are supposed to be enabled at all times, but recently my Pixhawk has suddenly stopped recording dataflash logs. It just says that the SD card is empty and there are not files. Do you possibly have an explanation as to why it stopped…"
Hey there,I have a few problems involving recording flight data with the dataflash logs:Problem 1:I recently tried to change the type of information that was stored on the dataflash logs on board my Pixhawk, and to change this I went to the…
Dear all,I am flying a fixed wing aircraft with the FPV/OSD kit from 3DR. I have it plugged into the telemetry port 2 on a Pixhawk and I am seeing telemetry data displayed on my screen (3DR Black Pearl HD screen). However, I notice that the horizon…
"Hey there,
Can you please tell me where in the code you found the sampling frequency? I am a newbie, and any help would be appreciated. I think I need to increase my sampling frequency as well, and I will let you know what I find.
Thank you for any…"
Can you please tell me where in the code you found the sampling frequency? I am a newbie, and any help would be appreciated. I think I need to increase my sampling frequency as well, and I will let you know what I find.
Thank you for any…"
"Hey there!
Sorry that you have been waiting for an answer for almost a year. Sometimes that happens with open source sites like this. But I will share with you what I think I know:
I am having some issues with that as well. I would prefer everything…"
Sorry that you have been waiting for an answer for almost a year. Sometimes that happens with open source sites like this. But I will share with you what I think I know:
I am having some issues with that as well. I would prefer everything…"
Hey guys, I am pretty new to all this, but I have a problem with using 'Make' to compile the ArduPlane code in Eclipse for my Pixhawk. I have been following the directions on this…
"I am currently having problems with Eclipse, and this link doesn't work anymore. I have had similar luck with other links that take me to this ArduPilot-Mega Wiki. Is the link dead? I have been getting a lot of my information from this link:…"
"Wow, I didn't know that port 1 can deliver more current. Does this make a difference when one either plugs in the 3DR radio module or the OSD into port 2? "
