Gender
Male
About
Location
Carlisle Cumbria
Please tell us a bit about your UAV interest
at the minute i am flying a quad with naza gps fitted . but have just order a APM 2.5 for a fixed wing uav (easystar). i also fly mainly electric rc scale planes
Hometown:
Carlisle UK
Activity Feed
"well done ....
I am looking forward to the day when I can post my first 100km flight .
your flight and other flyers doing long range keep me inspired."
I am looking forward to the day when I can post my first 100km flight .
your flight and other flyers doing long range keep me inspired."
"thank you for all your hard work...well done"
HiI am trying to set up the failsafe in adrucopter .I am using a APM2.5 running 3.1 software .My radio is a 9XR with opentx software and an Open LRS module.I have gone through the instructions and try as I might I cant get it to work .When I turn…
"I just wonder if the "rssi range" will be in arduplane ?
fingers crossed
cheers darren"
fingers crossed
cheers darren"
"hi again
I check out the GPS ,I got the same problem even when GPS was disconnected.
Next I load a old version of arduplane , but still same problem , so next I did a system reset .
it looks like the apm firmware was corrupted .
I have reset the APM…"
I check out the GPS ,I got the same problem even when GPS was disconnected.
Next I load a old version of arduplane , but still same problem , so next I did a system reset .
it looks like the apm firmware was corrupted .
I have reset the APM…"
"thanks guys , I will try both ideas later today and let you know
how I get on
cheers"
how I get on
cheers"
Hi everybody . hope someone can helpI am setting up my bixler with APM2.5 2.74 and Open LRS 1w .I notice when looking at the HUD when I turn on TX the ground speed indicator went to70 (this is when plane is sitting still on my living room table)…
"nice to see another positive UAV story"
Hi everybody...I have decided to switch 1 of my APM 2.5 from multicopter to plane.I am using a bixler 1.1 stock setup .But when in STABILIZE mode the plane turns to the right quite hard ..I have the APM nice and level , any ideas please…
"just watched the video ,,nicely done . look forward to build video .
could you give the surrguested motor , esc etc
cheersdarren"
could you give the surrguested motor , esc etc
cheersdarren"
2013-09-27%2014-48-55.tlog2013-09-27%2014-48-55.rloghimy quad went out of control today and ended up in pieces . it as been flying well in all modes for several weeks , only recent change is added minimosd . here the log , hope someone can help me…
hi everybody ..I am switching from 3cell lipo to 4 cell lipo pack do i need to make MP changes ?Its just when I plug the 4 cell in the quad wouldn't arm?I don't have a current monitor .I power the APM from the ESC bec .cheers
"hi and good luck .
if you got the ferry to france ,and went for a fly on the beach ,it would be a shame if your
TX battery went flat and your X8 APM return to home kicked in (set to your club field of course with waiting club member in attendance ) …"
if you got the ferry to france ,and went for a fly on the beach ,it would be a shame if your
TX battery went flat and your X8 APM return to home kicked in (set to your club field of course with waiting club member in attendance ) …"
"Hi everybody ..
Yesterday I upgrade to 3.1 from 2.9b. in hope the I could get the "DO_SERVO" to work . I can manually control the servo with R/C channel 7,But still no luck in auto mission
Any chance Randy could do a video or screen shots of MP…"
Yesterday I upgrade to 3.1 from 2.9b. in hope the I could get the "DO_SERVO" to work . I can manually control the servo with R/C channel 7,But still no luck in auto mission
Any chance Randy could do a video or screen shots of MP…"
"hi again
think I solved the motor twitch.
I remove R/C channel 8 from APM and then change software to "none " for the action of cannel 8
Now no twitch
But still no luck with the "servo_do" command, any help ?
cheers"
think I solved the motor twitch.
I remove R/C channel 8 from APM and then change software to "none " for the action of cannel 8
Now no twitch
But still no luck with the "servo_do" command, any help ?
cheers"
hi everybodyyy ..just upgraded from 2.9.1b. to 3.1I didn't upgrade the ppm , I tried but could not get it too . the problem is the motors twitch when the apm2.5 is armed .but it flys great .Do I need to recalibrate the esc ?I been flying the same…
