You can connect USB with battery connected when JP1 is installed.
You can connect USB with battery connected when using power module, JP1 MUST be removed
Connecting JP1 and power module will fry your board
"Go to full parameter list, the first 2 parameters are ACRO_RATE_ROLL and ACRO_RATE_PITCH set these values to 0. This is the rate at which pitch and roll will stabalize in acro mode. Set to 0 to disable or set as desired. Once disabled you will be…"
Hey guys, whats the best way to power the APM/Pixhawk.Ive been running all my APMs off the ESC BEC but have read and heard alotof bad storys regarding brownouts.My question is, is it best to use a dedicated BEC? Also, to power from both input and…