Please tell us a bit about your UAV interest
caspiquad.googlecode.com
About
Activity Feed
"What about the old APM1? Is it supported?"
"This is actually very easy, no special flying skills required. Just a nice result of multicopter physics. Here's my quad, long time ago:"
"Looks like a great product with a great potential for improving the quality of complex Arduino-based s/w such as ACM!"
"I also have a similar problem with channel 6 on APM1. In the calibration screen it shows a fixed value (don't remember if it's 1500 or 900).
To find the cause of the problem, I swapped cables with channel 7 at the receiver. Still APM1 saw a fixed…"
To find the cause of the problem, I swapped cables with channel 7 at the receiver. Still APM1 saw a fixed…"
"This discussion sort of fizzled out... but I still think it's an important feature.
Any chance of it getting into an upcoming release?
Dror"
Any chance of it getting into an upcoming release?
Dror"
"Excellent!
Could you please tell us more about how this project cooperates with ArduCopter? Is it part of the development of a future ACM 3.x?
Dror"
Could you please tell us more about how this project cooperates with ArduCopter? Is it part of the development of a future ACM 3.x?
Dror"
"Note that they give proper credit to 3DR. This is the least you would expect from a clone."
"As an experienced software engineer, I personally think that Arducopter has long ago grown well beyond what should run on an Arduino. Software-wise, Arducopter should have been based on an RTOS. Hardware-wise, it should have been freed from all…"
"Why? It's not even cheap."
"Just raising this discussion again because it seems to be lost among the 2.7.x discussions. I believe this is an important feature and would like to have the developers' opinions.
Dror"
Dror"
"Thanks! I will check this out.
Great work on the MP!
Dror"
Great work on the MP!
Dror"
Michael,Would it be possible to add a low battery alert (loud alarm sound, whatever) to Mission Planner?I already has the battery voltage information, what is needed is to define a threshold.I deperately need a way to turn my attention to the…
"I would really like it to work like the Naza (below) or better :)"
Hi,Is it possible to configure ArduCopter (2.7.3) to do and RTL (and optionally land) if the battery voltage becomes too low?I read the Wiki over and I'm not sure how to do it.I have battery monitoring on my setup (APM1) and can read the correct…
"I believe that there should be a menu entry or button for every function. Right clicks are very good shortcuts, but they should not replace the more obvious and more easy-to-find methods.
Just my 2c about UI... I'm not a UI designer but I am a…"
Just my 2c about UI... I'm not a UI designer but I am a…"
"Another direction is to increase the number of propellers. Why not go with an Octo or even with 16 props? Less prop momentum issues, more reliabililty etc."
