Gender
Male
About
About Me:
Eat Sleep Drink FPV
Please tell us a bit about your UAV interest
Well just dabbling.
Hometown:
Skies
Activity Feed
Guys,I am having an issue with Loiiter mode on my Arducopter. Here is what happened. I was hovering at about 2Meter ( eye level ) altitude with 16 Sats in Loiter mode. All was calm and stable.After a few minutes, the Quad seems to automatically go…
Guys,I have a strange issue with my Hexacopter running an original 3DR Pixhawk.The hexa was configured about 3 months back and was perofmrning well, but from last couple of days Motor 4&6 turn on intermittently ie when in stabilize mode and i power…
"Anyone ? "
"Thomas, My comment did not post completely, for some reason.
So when i power up i get the musical tone. and then after about 10 seconds i get a flat, long beep . This long beep is what i am curious about. Does it signal some kind of error ?
The…"
So when i power up i get the musical tone. and then after about 10 seconds i get a flat, long beep . This long beep is what i am curious about. Does it signal some kind of error ?
The…"
"Thanks Thomas ,
The audio is there in the video . "
The audio is there in the video . "
Guys,I am having some trouble figuring out if the sounds from my Pixhawk running the latest APM:Plane on it , indicate a problem. Everythign otherwise seems to work great on ground - though havent flown in air.Heres the video…
"Smart ! :) But wish they could give the ability to use the channel input otherwise lying waste to manually trigger the cam .. I think will need only a couple of lines of code to do this"
"OK, thats what i thought too. Would have been great if they made the triger such that it worked on Auto when the PWM was less than 1400. And worked on manual when more than that. Then we would have been able to use a switch to trigger the camera…"
Guys,I configured the camera trigger on CH6. I can get this to work using the "Trigger Camera NOW" on the MIssion Planner. I am sure it would work with the Camera distance trigger. But what if I wanted to manually trigger a picture using my RC ? I…
"I have a question on the Pixhawk power supply which i posted here but havent had a reply.
http://diydrones.com/forum/topics/pixhawk-power-supply-questions-on...
So we connect the BEC power to the servo rails and the PMU to the Pixhawk. In case the…"
http://diydrones.com/forum/topics/pixhawk-power-supply-questions-on...
So we connect the BEC power to the servo rails and the PMU to the Pixhawk. In case the…"
"Hi guys,
Was wondering if I can have some help here ?
Thanks so much !"
Was wondering if I can have some help here ?
Thanks so much !"
"Well I have never been able to register there. Always says my IP is blacklisted. Well I never had any problems in signing up anywhere else in the world ! "
"Excellant ! Which software was used for stitiching the pictures ? "
Guys,Was installing the new Pixhawk on a plane and was using the 3DR power module to power the Pixhawk. I also have an ESC (w/BEC) and 4 servos to drive around. Now i noted that without the ESC connected the Servo rails were powered with the 3DR…
Hi,In the older versions of MIssion planner, when I made a grid, starting with a polygon, it used to create several waypoints within the straight sections of the grid, and I had control over how many of these, equally spaced waypoints were made. In…
