About

Gender

Male


About Me:

I'm a photographer from New Zealand - http://facebook.supersharpshooter.co.nz


Please tell us a bit about your UAV interest

it started with an fpv video on youtube...


Activity Feed

Glenn M replied to Francklin's discussion RTKlib Touchscreen GUI for Raspberry pi2
"Got it working. The problem was the config file that came down with the git pull had some options that seemed to stop my setup from working. I imported a working config file from my windows rtklib setup, and it looks to be working properly now using…"
Aug 28, 2017
Glenn M replied to Francklin's discussion RTKlib Touchscreen GUI for Raspberry pi2
"So I have it running and put it outside for a test, but I can't seem to get it to pick up any satellites even after 30 minutes.

I'm using it in Rover RTK-Static mode, and am using an rtcm3 CORS base station via the internet.
The GPS unit is a Ublox…"
Aug 26, 2017
Glenn M replied to Francklin's discussion RTKlib Touchscreen GUI for Raspberry pi2
"Tried that but it still didn't seem to build a binary that could be executed.. I got it to build and run just using your supplied version of rtklib in the beta 1.1 branch.
Francklin said:
Perhaps you have to do it without the build script, go to th…"
Aug 26, 2017
Glenn M replied to Francklin's discussion RTKlib Touchscreen GUI for Raspberry pi2
"So I've done  git pull of the RTKBASE Beta-1.1 branch, then I rename the RTKBASE/lib/rtklib/src folder to src.bak, then I copied the src folder from Rtkexplorer Demo 5 into there. Then its back to the RTKBASE folder where I run ./build_rtkbase.sh wh…"
Aug 25, 2017
Glenn M replied to Francklin's discussion RTKlib Touchscreen GUI for Raspberry pi2
"Is there a way to use rtkexplorer's demo5 version of rtklib with this?

http://rtkexplorer.com/downloads/rtklib-code/

Also how would I install this on a pi2? Is the source updated, or is it just the new image you have for the pi3?"
Aug 25, 2017
Glenn M replied to Francklin's discussion RTKlib Touchscreen GUI for Raspberry pi2
"I'm having trouble getting RTKBASE to run properly on the raspberry pi.

If I go into ~/RTKLIB_Touchscreen_GUI\RTKBASE and run ./RTKBASE it opens correctly with a white background, but if I create a desktop shortcut, or start it using any of the aut…"
Feb 13, 2017
Glenn M commented on Gerard Toonstra's blog post Cheap 1-2cm (scale) accuracy for your surveys
"Looks like I didn't have the Cycle Slip markers on for those last obs plots, but I've been reading the rtklibexplorer blog and there's some good info on there.

I re-did the test this afternoon but powered the units on for 5 minutes before starting…"
Feb 6, 2017
Glenn M commented on Gerard Toonstra's blog post Cheap 1-2cm (scale) accuracy for your surveys
"I can't see any cycle slips (red lines) in any of them by viewing the obs data for each GPS in RTKlib.

In all of them there seems to be some sats which the receiver sees intermittently, with the Drotek XXL with the big antenna picking up more satel…"
Feb 6, 2017
Glenn M commented on Gerard Toonstra's blog post Cheap 1-2cm (scale) accuracy for your surveys
"Thanks for looking at this. Is there an easy way to see if one receiver lost sats that the others didn't, or do I just play the log in u-center and see if I can spot sats dropping out?

I'm using a Drotek XXL M8N for my PPP-Static receiver, it's ver…"
Feb 6, 2017
Glenn M commented on Gerard Toonstra's blog post Cheap 1-2cm (scale) accuracy for your surveys
"I'm having trouble getting reliable results using this method. Can someone who's had success with this see where I might be going wrong?

I have 5 x M8N units on tripods (with TRK-MEAS turned on), connected to openlogs, and I space them out in a lin…"
Feb 6, 2017
Glenn M replied to ActionDrone's discussion New setup for 3D Mapping and nadir photogrammetry - help please in Terrain/Surface Mapping
"I use a T960 with a Nex5 + 16mm which has been modified to have a wire soldered to the shutter button, and triggered with a relay from the pixhawk. Works much more reliably than an IR trigger, and can be triggered much quicker, and the nex5 is cheap…"
Apr 11, 2016
Glenn M commented on Jeff Taylor's blog post Process Maps, NDVI and 3d Models for Free
"I'm after a browser hosted interactive 3d model viewer to display (to the client) the 3d model generated from a survey mission. Is this something you can offer?"
Mar 15, 2016
Glenn M commented on Hugues's blog post Sony QX10 mod for remote wire shutter trigger
"1 shot per second is fast enough for mapping. I wonder how many shots at 1 per sec before the buffer fills and it has to slow down, or whether it can keep shooting at that speed."
Feb 21, 2016
Glenn M commented on Hugues's blog post Sony QX10 mod for remote wire shutter trigger
"How quickly will this camera shoot subsequent frames? "
Feb 20, 2016
Glenn M posted a discussion
Hi, I'm having an issue trying to geo-ref my images.I'm using the dataflash log, and for each photo get the message: "Photo DSC09916 processed from CAM Msg with 0 ms shutter lag. AMSL Alt NOT found" If I uncheck AMSL alt and have a rel. alt base of…
Oct 13, 2015
Glenn M replied to Randy's discussion Copter-3.3 beta testing
"I've just found some more weird behaviour with this log while using the geo ref tool. Using a time offset then generating the location kml, the flight path gets cut off about 40% of the way into the flight, then jumps to the end position, and also h…"
Sep 24, 2015
More…