Do you find keeping orientation in flight can be difficult at distance or in low light.
Do you find the current lighting solutions for multirotors satisfactory
Would you buy a frame specifically designed for lighting and efficiency
Do you find the cost
Read more…In mission planner, there is RNGFND from 0 to 9 and A.
I can define 10 zones, left front left, front, front right, right, rear right, rear, rear left, up & down.
but i see no documentation ANYWHERE!!
can someone link me to any documentation for more tha
Some classic RC, courtesy of my Grandpa,
Some classic RC, courtesy of my Grandpa, unfortunately he died in 2012, bu the left a good legacy.
hey i have a problem with my copter, i recently bought a new board but it seems to have a fatal flaw
it will not correct yaw!!!!
when take off the copter simply rotates in whatever direction it feels.
it works fine with manual input and will rotate fin
Read more…Your IP 81.147.65.127 has been blocked because it is blacklisted. For details please see http://www.sorbs.net/lookup.shtml?81.147.65.127.
Your IP 81.147.65.127 has been blocked because it is blacklisted. For details please see http://www.barracudacent
'hey guys, i have been using position hold for quite some time, it is the only mode which offers position fix x and z only, why has this been removed?
I allowed me to film exactly how i wanted to film, fast ascension whilst maintaining a fixed positio
Read more…So i just built a H8 copter today, as far as i know one of the fist H8's but anyways
When in a hover, if i throttle up to ascend, the props make a humming noise, similar to diving in a airplane.
like the props are oscilating besides teh rotation.
]Anyon
Read more…A Simple idea for a big problem
Rc model safety, Is everyone doing
what they can do to protect out hobby and the public.
(summary: I would like a splash
screen to be implemented on all software that gives safety tips each start up)
Full story
Please don'
Read more…Ok will someone please tell me whats going on, when i power on the gimble doesnt work which i understand it needs to initialize but it can take up to 30 seconds for the gimble to start working and ust before the elevator servo twitches 3 times.
Can so
Read more…hey guys, i want to build a octo in v configuration but the APm doesnt support this, is there a way to add support for v configuration?
Read more…OK i have tested my new octocopter on 3.0 and have found a big issue that i am unsure of how to fix.
Stabalise workes perfectly, no issues whatsoever but loited has serious problems, it is sporadic and unpredictable.
I have a full flight video linked h
Hey guys i have an issue with my newly built octo, whenever I switch to loiter it cuts throttle and falls like a rock whist still leveling.
I need to know why it is behaving like this and how to fix it if anyone knows, i will also link the KMZ and log
Read more…The current log system is poorly explained and well not great to be honest.
It is archaic in the way you have to access everything, now if i could code i would do something about it but i cannot, so i thought i would post here in the hopes someone e
During a 2 minute hover in loiter i decided to do a 360 yaw to get a panorama, however the copter suddenly cut power and fell i was not able to input control until suddenly it just throttled back up.
Any idea what happened?
How do i download the log fi
Read more…IT would be cool if someone actually connected an ardumega to a real aircraft to demonstrate its potential, in fact i see no downsides besides having to implement the controls with servos or an equivalence.What are your guys ideas on this?If anything
Read more…OK so here is the problem and how it developed.When the apm is on the ground, i arm it while in stabilize and take off, during the flight i climb vertically then drop, just as it is falling i throttle up and it just falls like a rock, on the ground t
Read more…hi, i have a 500 glow powered heli which could do with a flight controller.
is it possible to use the ardumega 2.5?
Read more…I have found links on wiki and other sites partially describing the differing modes but they are quite cryiptic, can someone explain what each does.
There is as follows
Acro ? (i am unsure, need detail)
Alt hold (stabilize but holds alt)
Auto (flight pat
Read more…I recently was reading a thread about someone wanting 60 minutes flight time on a large octocopter and other saying they wanted to power their quad with a combustion engine.
Neither of them knew how to get what they wanted then i had a great idea (i t
Read more…I have almost exclusive access to a laser cutter and so designed my own frames and tested them out
here is one of them.
If you are interested in your own fram , i can make one for £5-£10 plus material depending on its design.
Just message me
I can post w
Read more…