Gender
Male
About
Please tell us a bit about your UAV interest
All has started when I was young and saw rc planes flying at my home town field
Hometown:
Aveiro
Activity Feed
"Didnt find correct place to post log related to 3.4-rc1
I am having serious issues with my copter, in the way that it does fly for a short period and then just descends abruptly hitting the ground. As soon as I see it descending (usually i'm flying…"
I am having serious issues with my copter, in the way that it does fly for a short period and then just descends abruptly hitting the ground. As soon as I see it descending (usually i'm flying…"
"Thanks for taking a look Cala.
It also could be #4 right ? and 3 tries to compensate ?
It is for sure the motor or could be the ESC ?
coincidence or not the ESC #3 got pretty damaged upon hitting a wall (some capacitors and a few other components…"
It also could be #4 right ? and 3 tries to compensate ?
It is for sure the motor or could be the ESC ?
coincidence or not the ESC #3 got pretty damaged upon hitting a wall (some capacitors and a few other components…"
"Anyone kind to take a look please ?
I cant really figure out what happened. It was fine before 3.3.2..."
I cant really figure out what happened. It was fine before 3.3.2..."
"Hi everyone,
I was enjoying 3.3.2 but suddenly had crash :( . I think one of the motors/prop/esc just stopped at ~55m and then just saw it falling
Could you please help me figure out what happened ?
Log…"
I was enjoying 3.3.2 but suddenly had crash :( . I think one of the motors/prop/esc just stopped at ~55m and then just saw it falling
Could you please help me figure out what happened ?
Log…"
"Oh I got it wrong then. I thought that *_use was for internal and *_use2 to external.
Thanks Randy for clarifying it"
Thanks Randy for clarifying it"
"Sorry if this has been asked before but it's confusing me...
With an external compass attached, the compass_use and compass_use2 should be set to what ?
From my understanding compass_use is for internal and compass_use2 is for external, so this…"
With an external compass attached, the compass_use and compass_use2 should be set to what ?
From my understanding compass_use is for internal and compass_use2 is for external, so this…"
"Randy, just to let you know that using Marco's config file did the trick !!!
That or the change of GPS_TYPE to Ublox. I did those two at the same time, so I dont know for sure which made my quad fly well again
Thank you!"
That or the change of GPS_TYPE to Ublox. I did those two at the same time, so I dont know for sure which made my quad fly well again
Thank you!"
"@Randy, thanks for taking a look !
How/where can I check/look to on this side that the mission item is invalid (has the 255 command ) ? So I wont have to go outside to test the Auto behavior."
How/where can I check/look to on this side that the mission item is invalid (has the 255 command ) ? So I wont have to go outside to test the Auto behavior."
"How could it happen to have 4 bad missions in a row ? Being two of them created with Mission Planner and the other 2 with tower app.
I'm gonna try to log more stuff and repeat this. However, this time I wont be able to fly over water to avoid a…"
I'm gonna try to log more stuff and repeat this. However, this time I wont be able to fly over water to avoid a…"
"hi
I almost had three crash's about a month ago and still cant figure it out
They all happen as soon as I engage AUTO mode, the quad droped altitude very fast (if i'm not mistaken the motors turned off) and I had to switch to stabilize and apply…"
I almost had three crash's about a month ago and still cant figure it out
They all happen as soon as I engage AUTO mode, the quad droped altitude very fast (if i'm not mistaken the motors turned off) and I had to switch to stabilize and apply…"
"Thank you Randy
If I'm not able to 'save' my GPS unit by loading these parameters from another unit, what's the next step ?
I mean, I've only changed a few parameters within ublox ucenter software, how can that make a gps useless :|"
If I'm not able to 'save' my GPS unit by loading these parameters from another unit, what's the next step ?
I mean, I've only changed a few parameters within ublox ucenter software, how can that make a gps useless :|"
"@Pit do you mind sharing a copy of your M8N parameters from ublox ucenter software ?
How to:
You need to save it as .txt
Open ublox ucenter , menu tools -> GNSS Configuration -> GNSS to file
thanks"
How to:
You need to save it as .txt
Open ublox ucenter , menu tools -> GNSS Configuration -> GNSS to file
thanks"
"Sorry Leon, but the .ubx file didnt work out.
You need to save it as .txt (ublox ucenter , menu tools -> GNSS Configuration -> GNSS to file
please"
You need to save it as .txt (ublox ucenter , menu tools -> GNSS Configuration -> GNSS to file
please"
"What's the diameter of that round one ?"
"You mind making a copy of your M8N parameters with ublox u-center and share it with me please ?
Cause I've made some changes to my two units, namely SBAS, NAV5, refresh rate settings and now even using the 'reset to default values', makes my quad…"
Cause I've made some changes to my two units, namely SBAS, NAV5, refresh rate settings and now even using the 'reset to default values', makes my quad…"
