As a test of my new 3d printer (XYZprinting.com - DaVinci 1.0A) - prototype of simple 2-axis gimbal for ortophoto dedicated to Tarot 6xx series mount (10mm dia tubes, 65 mm distance).Only: 3 parts + 2 motors + 2 bearings + STorM32 + few bolts.Ready…
"Latest version of MissionPlanner have already elevation graph based on srtm module (in case when Google altitude is not available), but still 50 km limit is present.
Only change you need is to replace "50000" in ElevationProfile.cs line 186 to…"
"Sample log file:
- in Auto mode only roll stabilisation by APM. Elevator and throttle - hand controlled, rudder - fixed position.
- turns - by hand. During turns auto mode active, but power (+12) to servo switched-off.
Suggestions for tunnig -…"
"Some more photos.
To interface module - 2 additional displays (LCD) possible connection: one is 2x16 char as a Mode and Trim display (+ 6-position rotating mode switch, + 2 trimm switches - +/- pitch and +/- roll), second 320x240 touch screen as a…"
Hello,after a few weeks of work - APM 2.5 with interface modules for 2 MGL Servos was installed in real plane VL-3 (ultralight). Rudder - fixed position, throttle - controled by "man" pilot.Main purpose - as a help for pilot to fly ortophotography…