Gender
Male
About
Please tell us a bit about your UAV interest
i lije building diy robots
Hometown:
melbourne
Activity Feed
"Thanks for responding.
The one that i have the RC Timer one (i thought i was pre-configured). How would i go about doing this?
Kind regards
Tawanda"
The one that i have the RC Timer one (i thought i was pre-configured). How would i go about doing this?
Kind regards
Tawanda"
HI i have an apm 2.5 paired with a CN06 PLUS gps module (with external compass). I am using the internal compass and the GPS Fix led just blinks. I do get a solid fix for 10 seconds after switching on and then starts blinking. Do you have any idea…
Good day all i was wondering if there is a mission planner for android, or linux or Ubuntu (so that i can set waypoints using my android tablet or a single board pc like raspberry pi/beaglebone e.t.c) my current setup (not done…
"will do! thanks for checking it out!"
"Here is my current build. It will be undergoing 6wd conversion within 2 weeks or so.
http://letsmakerobots.com/robot/project/terrestial-explorer-v10"
http://letsmakerobots.com/robot/project/terrestial-explorer-v10"
"Thanks for your reply Grant. i'll let you know of my progress!"
"thanks! your project is a great morale booster for mine. sadly my rover does not have suspension but its something i'll add on after i have had some time. i thought speed was a factor but its great to know that thats not the case.
Thanks for sharing…"
Thanks for sharing…"
Hie all i was wondering what the slowest speed a rover can be set to for navigation? I have a new platform that is meant to go about 4-5km/h (2.5-3.1 mph). would that be too slow for following gpswaypoints or does speed not matter as much?Thanks in…
"I like your idea of running it for a time manually before putting it in auto mode. I will try that and see if it solves my problem. Do you know what is the minimum amount of waypoints i can run? I currently have 2 waypoints, spaced at about 11-13m…"
"This time i even started the rover on the home waypoint (facing towards the first waypoint) which is about 10m from the first waypoint. It drive normally in manual mode but the starting up issue is my main problem. Are there any youtube videos to…"
"Hie again. i tried your suggestions and there is no change. (it keeps reversing and turning around in circles) bot the apm and gps are oriented correctly. if i tick the reverse box, it just goes around in reverse."
"Im starting my rover about 5m in the opposite direction. I should correct that. I will make this changes and go out and test it again after i repair my rover from an earlier crash.
Thank you for your help. i will let you know of my progress"
Thank you for your help. i will let you know of my progress"
Hie everyone. I am having other issues now with my rover.1. When ever i flick the switch for it to go into auto mode, it reverses, turns several times before correcting itself then going to the waypoints.2. When it goes through a checkpoint it…
"Thank you it worked! I made a 10x 10x 10 triangle and the rover followed the waypoints. The only problem that i need to sort out is the turning speed as it overshoots and then reverses and goes forward and reverses and goes forward and jitters all…"
"Thank you for your reply. I will let you know of my progress tomorrow morning as it is night time here in Australia. Thank you for your help"
"I did one of my back-yard so about a 5 X 5 X 5 triangle.
I'll go to the park tomorrow and make a much larger waypoint. "
I'll go to the park tomorrow and make a much larger waypoint. "
