Thanks for sharing your progress with the A5100. I would love to see the file for the 3D printable gimbal for the camera. I'm not sure if you would post here or need an email to send the file to.
Thanks so much again! mb"
Thank you for taking the time to leave such detailed feedback regarding this inquiry! Since making this post I have confirmed that this task is possible when using Agisoft Photoscan, pix4d and MosaicMill. I'm sure other software can…"
Hi All,I've been requested to produce geo-referenced, single framed images take from a UAV. I'm successfully able to create ortho mosaics but am unsure how to automatically generate individual geo-referenced frames. Any suggestions for the most…
"I've been very happy with Photoscan results for 3D models but have had less luck producing orthos which retain the integrity of linear features (power lines) across multiple images. Example.png attached. Any recommendations on software that will…"
"Gents, thanks for the feedback. This seems to be a popular camera with many (at lease for fixed wings) but I guess it doesn't work as well underneath a quad. My next step will be to sync the logs to get better data but I agree with James that a…"
Hello All,I have recently been experimenting with a Canon SX260 HS for creating orthos and have discovered large discrepancies in the recorded altitude positions stored in the EXIF data. Over the course of a few weeks I would sometimes have data…
"Thanks Mark. Did you receive the out of range warnings when you loaded the new parameters for Iris+?
My Iris was acting strange before the upgrade so I wonder if the values were related or just coincidental?
20.5 minutes of flight time sounds…"
Hi Gang,I just completed the hardware portion of my Iris>Iris+ Upgrade and am now attempting to upload the Iris+ parameters.I came across an error message and many warnings that some of the new parameters are out of range. The 1st message is: Raw…
Did you figure this out? My channel 3 pwm values don't change either when I turn transmitter on/off. I'm not sure what I'm missing here and how to adjust calibrate this. Were you able to get them set to be plus/minus 10 of FS Pwm?
"Thanks for all the great feedback, this is such an awesome forum!
3DR is being very helpful in resolving this issue and I look forward to getting back in the air soon, albeit without the wobbly antenna!