Gender
Male
About
Activity Feed
"http://www.thecomedynetwork.ca/Shows/TheColbertReport?videoPackage=...
That link should work for us Canadians.
"
That link should work for us Canadians.
"
"Cool. Thanks for the answer.
Is 0.37 the "old way"? Or the "new way". I only got my quad back in the air last night after a month of no flying, so I'm using 0.37 which was the latest available via the Mission Planner.
Tom
"
Is 0.37 the "old way"? Or the "new way". I only got my quad back in the air last night after a month of no flying, so I'm using 0.37 which was the latest available via the Mission Planner.
Tom
"
"I'm looking around for a good description of the changes to the ground start logic, and the differences between 2.0.37 and 38. I haven't found anything specific so here goes:
-What is the exent of the ground start alignment? Is it only nulling…"
-What is the exent of the ground start alignment? Is it only nulling…"
"You, sir, have anger issues.
:)"
:)"
"Hi Markus,
Have you had any issues with the ArduPilot Mega and IMU shield operating in cold temperatures? It's also winter here in Canada, and I've noticed some "odd" behaviour with my ArduCopter using ArduPiratesNG software. Generally the…"
Have you had any issues with the ArduPilot Mega and IMU shield operating in cold temperatures? It's also winter here in Canada, and I've noticed some "odd" behaviour with my ArduCopter using ArduPiratesNG software. Generally the…"
"I wrestled with this last night actually.
In the end I found a post in KinderKram's RCGroups Thread that stated that you need to delete the existing libraries before copying over the new libraries. For some reason, the copy, and overwrite in windows…"
In the end I found a post in KinderKram's RCGroups Thread that stated that you need to delete the existing libraries before copying over the new libraries. For some reason, the copy, and overwrite in windows…"
"The divide by 100 on the parameters is because of memory issues on the processor.
It takes alot more time and memory for a processor to work with a floating point (decimal) numbers than with integers.
To get around this, things like altitude (in…"
It takes alot more time and memory for a processor to work with a floating point (decimal) numbers than with integers.
To get around this, things like altitude (in…"
"If I didn't know better, I'd say that the first picture looks like the NEAT fair grounds near Downsville N.Y?
Ever been to NEAT?
Tom"
Ever been to NEAT?
Tom"
"As a corollary to this, I was taught in school that, in addition to affecting toilets, canon balls, and weather systems, Coriolis Force makes drunk engineers always fall over to the right.
;)
Tom"
;)
Tom"
"I don't think that they're necessarily speaking of the Coriolis effect of the earth. The spec sheet says Coriolis Force, which is general, and could apply to any rotating frame of reference.
My guess is that they are including something in the…"
My guess is that they are including something in the…"
"Hi Jason,
I noticed that ground_course went from an int to an unsigned int when I moved from 2.6.2 to 2.6.3 on Friday. (I noticed when my X-Plane simulator was reporting courses >360 degrees.
Won't this cause a problem when working with ArduIMU…"
I noticed that ground_course went from an int to an unsigned int when I moved from 2.6.2 to 2.6.3 on Friday. (I noticed when my X-Plane simulator was reporting courses >360 degrees.
Won't this cause a problem when working with ArduIMU…"
Well I'm back in the basement tinkering after a brief hiatus. After a couple in-air resets of the Ardupilot, I decided that I really wanted to do some simulation before commiting anything into the air again. I think the resets (and crashes) were…
"Hey all,
Thanks for the replies. I am not using any i2c sensors, and I am using the Arduino IDE, so I guess it seems that I've run out of RAM.
I just did some browsing on the Arduino.cc website, and it seems the best advice there is to reduce the…"
Thanks for the replies. I am not using any i2c sensors, and I am using the Arduino IDE, so I guess it seems that I've run out of RAM.
I just did some browsing on the Arduino.cc website, and it seems the best advice there is to reduce the…"
Hey Everyone, I'm back fiddling with my ArduPilot after an absence caused by a couple of crashes and just being busy with summer. Anyways, I'm having an issue with my ArduPilot board that is starting to become a bit of an annoyance. I wanted to ask…
"Charge rate depends on the mAh capacity of the pack. Drop the "h" and you have the save charge current.
So:
2200mAh - charge at 2.2A.
1350mAh - charge at 1.3A.
etc.
It should take roughly an hour to charge a fully depleted back.
These days alot of…"
So:
2200mAh - charge at 2.2A.
1350mAh - charge at 1.3A.
etc.
It should take roughly an hour to charge a fully depleted back.
These days alot of…"
