Gender
Male
About
About Me:
-
Please tell us a bit about your UAV interest
-
Activity Feed
"I have also tested this kind of floats. This was two years ago, in june 2014."
"Parachute weight is 250gGimbal + Hero is 320gTotal: 570gIn Solo manual page 80 there is text: "Payload capacity: 1.1 lbs. (500 g)"In Solo development guide there is text: "* The maximum payload of Solo with gimbal, camera and other accessories is…"
"Similar light system has been used in paramotors. At the end of this page there are some pictures: http://parinapojanjorinoita.blogspot.fi/2011_03_01_archive.html"
"It is quite easy to use also meters in formulas.Here is some simple mathematics:- Distance from equator to North pole is 10 000 km- Distance is also 90 degrees- So 1 degree is 10000 / 90 = about 111 km.- 1 meter = 90 / 10 000 000 = 0.000009 degrees-…"
"Wing length is 150 cm. It can not be much longer, there will be twisting of flutter problems.Wing chord is 25 cm. Wing material is 30g/l EPP."
"Does this help?
http://diydrones.com/profiles/blogs/georeferencing-pictures"
http://diydrones.com/profiles/blogs/georeferencing-pictures"
"I have not updated the program. But look this:
http://diydrones.com/forum/topics/version-1-3-of-apmlogvisualizer-w..."
http://diydrones.com/forum/topics/version-1-3-of-apmlogvisualizer-w..."
"Same also here. I fly couple of days ago. First flights were ok, as good as can be. Then in one flight copter suddenly without any warning flip to right and hit to ground. Fortunately we have here half a meter show, so no damages (except that…"
"Here is quite safe way to test copter: old matress. Then I tied a short line to the middle of copter, and other side through a matress, and there to a wooden stick.
I can freely test copter, motors and everything. In this picture copter is flying at…"
I can freely test copter, motors and everything. In this picture copter is flying at…"
"Does this program make good mosaics from forests?There are hundreds of trees, and they look quite similar. We must fly at low altitude (<150m), and same tree seems to be totally different in two picture. (Even if we try to make 60 - 70% overlap.)We…"
"Here is one. Only problem is to get those wing profiles.
http://diydrones.com/profiles/blogs/taigacam-robust-plane-for"
http://diydrones.com/profiles/blogs/taigacam-robust-plane-for"
"I use Canon PowerShot S90
http://diydrones.com/profiles/blogs/how-i-made-a-chdk-launcher-to-c..."
http://diydrones.com/profiles/blogs/how-i-made-a-chdk-launcher-to-c..."
"You can trigger the camera how you want. Camera saves the right time stamp to picture exif-data, and these programs can use it."
"That pcb is taken from servo. Only the servo motor is removed, and two wires going to motor are cut near motor. You can see these wires coming from pcb. Then I added that diode, and also usb-cable. I did not change anything else. This servo pcb can…"
"@David
Probably not very easily, but you can do it afterwards: http://diydrones.com/profiles/blogs/georeferencing-pictures"
Probably not very easily, but you can do it afterwards: http://diydrones.com/profiles/blogs/georeferencing-pictures"
"I can not test it, but it should be possible.
Look here details http://chdk.wikia.com/wiki/A495
and download firmware from here http://mighty-hoernsche.de/"
Look here details http://chdk.wikia.com/wiki/A495
and download firmware from here http://mighty-hoernsche.de/"
