Gender
Male
About
Please tell us a bit about your UAV interest
Planes & Multirotot
Hometown:
North
Activity Feed
"Nice,
Is it based on PX4 arch ?
what SW can run on the device ?"
Is it based on PX4 arch ?
what SW can run on the device ?"
"Nice effort, will definitely try it. "
"Thanks for your help.
Had crazy week, but did some testings today.
Lowered settings and i'm now vibrations are gone.
still need to retune the system to better stabilization."
Had crazy week, but did some testings today.
Lowered settings and i'm now vibrations are gone.
still need to retune the system to better stabilization."
"It worked before with same setup on Copter 3.1
I don't have earlier pids but will test it maybe without yaw."
I don't have earlier pids but will test it maybe without yaw."
"I run autotune and connect with telemetry to my phone running tower for monitoring.
log files"
log files"
"Hi I need help with my Hexa on AutoTune
Hexa with 3.3.3 fly ok with default params no issue.
wanted to have smooth settings and done Autotune.
After Autotune is done and params are saved, Hexa Oscillates even on ground when arming and bit THR up.…"
Hexa with 3.3.3 fly ok with default params no issue.
wanted to have smooth settings and done Autotune.
After Autotune is done and params are saved, Hexa Oscillates even on ground when arming and bit THR up.…"
"Great, and good luck to us all."
"I did some debugging on 1.3.33 code.
Seems that when mission planner try to open serial port, it runs some fix port routine and also tries to write data to the socket. I assume that it does make sense for some scenarios but for bluetooth it just…"
Seems that when mission planner try to open serial port, it runs some fix port routine and also tries to write data to the socket. I assume that it does make sense for some scenarios but for bluetooth it just…"
"Hi Randy,
Can you please look at my log, and posted compass issue reported few days ago?
Link to the post
Thanks..."
Can you please look at my log, and posted compass issue reported few days ago?
Link to the post
Thanks..."
"Hi Randy,
Probably busy after holidays and upcoming release.
Can you please take a look at my issue.
Thanks.."
Probably busy after holidays and upcoming release.
Can you please take a look at my issue.
Thanks.."
"Did a quick test flight today with my Hexa Copter version 3.3.1. Rebuild to reduce vibrations. Did all calibrations, but now i get compass variations during flight.Can someone please advice ?
Thanks...2015-11-26 10-55-23.bin"
Thanks...2015-11-26 10-55-23.bin"
"This is great,"
"Hi Randy,
I would say that your order is great, but its also a matter of balancing.
From my experience there is always priority tension between fixes and new deliverable's.
Recommend to define version cadence where balancing changes so will have:…"
I would say that your order is great, but its also a matter of balancing.
From my experience there is always priority tension between fixes and new deliverable's.
Recommend to define version cadence where balancing changes so will have:…"
"Hi Henny,
do you know if its also possible / recommended on pixhawk as well ?"
do you know if its also possible / recommended on pixhawk as well ?"
