I have just reciently been enjoying flying my quad (with a home built frame), and in the process of flying (rather replace flying with crashing), my frame is no longer flight worthy. I want to use…Continue
"I was fortunate enough that I had seen that this new GPS was coming and was able to cancel my original order with the integrated GPS unit and re-order the APM2 without it.
But I suspect that the upgrade path will be having to get the other…"
I have just reciently been enjoying flying my quad (with a home built frame), and in the process of flying (rather replace flying with crashing), my frame is no longer flight worthy. I want to use this opertunity to upgrade to the "official" frame, but so far I haven't been able to find the power distribution board for sale. I don't need a full electronics kit as I already have all the matching hardware, I just need a frame kit and power board. If anybody has any tips as to where I can find…See More
"You'll only see outputs after you arm the motors.
Basically until the code is actually sending a signal to the outputs it won't show up in the planner.
Just remember, make sure you don't have the motors powered up (or…"
MAVLink is the default GCS protocol, but it looks like it defaults to Port 1.
Looking at the code (at least the Beta1 zip file I downloaded yesterday), I think you'll still need the #define GCS_PORT 3 line in your…"
"@Dan: The title of the post says its a GoPro HD.
@Max: Good lord thats STELAR. Some wicked video and amazing flying. Makes me want to get my quad in the air this weekend. And re-affirms that I want to get a Hero HD. Nice stuff. Very very cool.…"
"There are pins that you can use that aren't taken up by other bits of hardware (in this case the relay). The ATMega 1280 analog pins are brough out to the holes on the IMU that are above the receiver wires. As well there are another pair (with…"