Diven Parker
  • Male
  • Los Angeles, CA
  • United States
Share

Diven Parker's Groups

Diven Parker's Discussions

Walkera F210 Flight Test with 95C Lipo

Started yesterday 0 Replies

Luckily to get three free Tattu R-line 4s 95c Lipo battery, and I then I test it for my Walkera F210. The …Continue

Tags: Walkera, F210, battery, Lipo, video

Tips: How to choose a quadcopter frame!

Started on Saturday 0 Replies

Step 1: Choosing your quadcopter frame sizes:There are many different size frame, the most popular is 180mm-250mm(180mm frame means the diagonal axis distance is 180mm), they are also used for FPV…Continue

Tattu 2305 2450KV Brushless Quadcopter Motors Review By Miniquadtestbench

Started Sep 15 0 Replies

Tattu has been an active member of the miniquad community since the early days, but this is their first foray into the motor world.…Continue

Tags: quadcopter, FPV, drone, motor

Some questions about QAC 250 build

Started Aug 26 0 Replies

 These are my quad build parts:Power Supply:Gens Ace LiPo Battery: 2200mAh 3S 25c Lipo,Assumption: 2.2*25 =…Continue

 

Diven Parker's Page

Latest Activity

Diven Parker posted a discussion

Walkera F210 Flight Test with 95C Lipo

Luckily to get three free Tattu R-line 4s 95c Lipo battery, and I then I test it for my Walkera F210. The Tattu R-Line 4s 1300mAh batteryperformed very well, punch-outs are even more impressive than with stock battery. I could say that also flight time was better, but this could be hardly determined because every flight is different. Full throttle drains the LiPo battery…See More
yesterday
Diven Parker posted a discussion

Tips: How to choose a quadcopter frame!

Step 1: Choosing your quadcopter frame sizes:There are many different size frame, the most popular is 180mm-250mm(180mm frame means the diagonal axis distance is 180mm), they are also used for FPV racing quadcopter; more bigger one is from 280 mm to 800 mm even more. Before build a quadcopter, you need know what quadcopter do you want to build, them choose the right frame and other quadcopter parts.There is a …See More
Saturday
Diven Parker replied to Sudharsan R's discussion ESC,Battery,Motor selection for quadcoter
"There is a Quadcopter frame, lipo battery, motor and propeller size matching table, it shows different size frame should match which motors, lipos and propllers."
Saturday
Diven Parker posted a discussion

Tattu 2305 2450KV Brushless Quadcopter Motors Review By Miniquadtestbench

Tattu has been an active member of the miniquad community since the early days, but this is their first foray into the motor world. Tattu 2305 2450KV Brushless Motors  are made for FPV Racing drone. Each Quadcopter motor has been carefully balanced and tested in the factory. This quadcopter motor are mainly suitable for 180-250mm quadcopter frame, the…See More
Sep 15
Diven Parker commented on Chris Anderson's group Agricultural UAVs
"Agricultural UAV Lipo battery http://www.genstattu.com/ta-plus2-0-15c-18000-6s1p.html Tattu Plus2.0 18000mAh 6S1P 22.2V 15C Intelligent Lipo Battery is mainly designed for DJI S1000, agriculture spraying drone, pesticide spraying drone, farming…"
Aug 31
Diven Parker posted a discussion

Some questions about QAC 250 build

 These are my quad build parts:Power Supply:Gens Ace LiPo Battery: 2200mAh 3S 25c Lipo,Assumption: 2.2*25 = 55 Amps Max DrawPower Demand:4 Tattu 2305 2450kV Brushless Motors with CrazePony 5030 PropellersAssumption: 7.2 (Peak Current) * 4 (Number of Motors) = 28.8 AmpsESC's used: …See More
Aug 26
Diven Parker replied to Rafi Nahmani's discussion How to get longest flight time on octocopter that has decent payload already on it?
"45 min flight time is too hard, I haven't flight octocopter, but I know DJI S1000 with Tattu 16000mAh 6S Lipo battery no load only can flight about 20mins, but you said you want this Octocopter to carry radioactive/chemical…"
Aug 24
Diven Parker posted a discussion

How To Build a Fast FPV Racing Quadcopter?

If you want to win a FPV drone racing, there are two important points: one is your superb flight skill, and another is your good FPV drone. About flight skill, you need to do more flight training, but get a good FPV drone is easier than flight skill. So How to build a fast FPV quadcopter?What’s a good FPV drone? I think a good drone must come with high speed and large acceleration. For racing drones, the acceleration is the most important. As we know FPV drone race track is very short and many…See More
Aug 14
Diven Parker replied to Diven Parker's discussion There is a question about 2305 2450KV motor's thrust.
"On my data table,  it shows prop: 5040; volt is 15V, thrust is 935, I don't know what  critical details do you want to know?"
Jul 12
Diven Parker posted a discussion

There is a question about 2305 2450KV motor's thrust.

I only know a little about quadcopter motors, and there is a question about my motor's thrust. I bought 4 pcs 2305 2450KV motors from a motor online shop, and I got a thrust data on their motor details, but my fridens said the thrust data probably is wrong, they should at least 1100g/1200g, but he is not sure.So what do you think of this motor…See More
Jul 10
christopher.shiny replied to Diven Parker's discussion Help! flight times only 2 and a half minutes
"Did you properly charge your battery? Too high or too low temperature may make your battery go empty sooner."
Jun 26
Diven Parker posted a discussion

Share: Stinger X210 Racer Drone Build

This Stinger X210 Racer Drone is built by Jure Korber, a Slovenia FPV pilot. First let me introduce this quad:Stinger X210 is an OPENSOURCE Racer frame that’s so cute. Main body part is 3D printed canopy! If made of ABS or PETG it’s really strong (you can probably stand on it) and you can get a nice finish (more about finish in my tutorial below). It holds FPV camera nicely in place with easy adjustable tilt…See More
Jun 20
Diven Parker posted a discussion

Frog Race Frog Lite 218mm Quad Build

Frog Race Frog Lite is a beautiful frame with Carbon Fiber 4mm Arm, it's an easy build and weighs in at only 286g. I really liked this frame, and I decided to build a Frog Race Frog Lite 218mm quad. About this build:This build supports Dshot600 and offers OSD for voltage monitoring and a built-in blackbox for tuning.It can easily carry a Session or Runcam 3 with a bottom mounted lipo battery, but you can top mount at…See More
Jun 7
Diven Parker posted a discussion

Lumenier QAV250 Carbon Fiber Edition

A lot can be done to reduce weight on drones, using different materials (complex composite materials or metal alloys). It can allow some weight reduction (but that weight reduction is highly dependant on the precise UAS type) and a subsequent flight time increase. But this will come at a huge price increase.So I think Lumenier QAV250 Carbon Fiber Edition is a good choice, are there other Frame recommend?See More
May 24
Diven Parker posted a discussion

Lumenier QAV FPV Flight

Drone Information:Lumenier QAV-xKiss Flight controlKiss 24A escT-motors f40ii 2400kvMatek pdbFoxeer HS1177 (2.1 lens)TBS unify prodalprop cycloneBatteryTattu 1550 4S 75C Lipo Battery;Tattu 1300mAh 4S 75C Lipo Battery.See More
May 19
Diven Parker posted a discussion

QAV-R (6") Build

Hey everyone! This is my QAV-R build. I'm hoping you guys can pick holes in my plan, as im not entirely sure if everything here is compatible. I definitely want to stick to a 6" build, and I want a machine geared towards maximum flight time. I'm hoping to quadruple-stack the ESC, PDB, FC, and barometer (in that order from bottom to top) to keep it nice and clean. The plan is to fly with with a TBS Tango controller, with FrSky XJT 16ch transmitter. Thanks for the feedback, I'm open to any and…See More
May 12

Profile Information

About Me:
I'm a drones lover
Please tell us a bit about your UAV interest
I like drones,I also buy a drones from manufacturers ,but diy a drone is more interesting.
Hometown:
Los Angeles

Comment Wall

  • No comments yet!

You need to be a member of DIY Drones to add comments!

Join DIY Drones

 
 
 

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service