I need help. I'm trying to get from my copter a maximum speed. It's ok but after that when I move elevator back to zero copter start to lift up his nose and can do 180 flip. You can see this moment…Continue
"My atmega2560 seems ok, it does the startup process (blinking LEDs), and after connecting it to the ftdi cable, I can connect it to the MissionPlanner, etc. So I think it's perfect.
The problem with the Atmega32u2 is that as it works as the PPM…"
"Thank you for explaining of reasons!!
May be I will also try to replace Atmega because I found this chip (ATmega2560-16AU) in stock in Moscow for $29.
Do you think will I need to reflash something before uploading of firmware?"
"For the moment I tried with an ftdi cable connected to UART0 pins and I'm able to connect with MissionPlaner. The sensors are ok, but as I thought I can't get any signal from the radio, so the PPM encoder is not working, I think the…"
"I also replaced my TS5A23157 when my APM2.0 USB/PPM stopped working. It seems that the Atmega32u2 is also partially burned... I can program it through ISP/DFU but it's not showing when I connect it to the USB. I've ordered a new…"