"My flight time is too long with a lipo 5000mA 4S, 13x8 prop and EMP 4240/9 750kv with pulso 60A ESC."
Giovanni Guastella's Discussions
Multiplx Mentor PID parameters
Started this discussion. Last reply by Daniel Portillo Apr 17. 6 Replies 0 Likes
HI, There is somebodi who can suggest me the PID Parameters for the Multiplex Mentor. I use the APM 1 and mision planner. Thanks in advanceContinue
Waypoints with APM planner
Started this discussion. Last reply by Henrik Flensburg Mar 23, 2012. 5 Replies 0 Likes
Can anybody help me? I'm flyng with ardupilot, IMU, GPS mega tek, Magnetometer. When I set the waypoints on APM mission Planner, setting them wiyh the command write on APM I launch the plane but it…Continue
Giovanni Guastella's Page
Latest Activity
Nikos Gerarchakis replied to Giovanni Guastella's discussion Multiplx Mentor PID parameters"I use a Scorpion SII 3014 1040kv motor with 11x6 prop. My Battery is a Zippy Flightmax 5800 mAh 4S1P, with a turnigy plush 60A ESC. I program my Tx (Futaba 8UAPS) to ATV throttle to max 40% .
My flight time is about 20-25…"
Daniel Portillo replied to Giovanni Guastella's discussion Multiplx Mentor PID parameters"what is your motor and propeller configuratión?"
Nikos Gerarchakis replied to Giovanni Guastella's discussion Multiplx Mentor PID parameters"Giovanni you are welcome . I m looking forward for your test . Today i upload to APM the latest code v2.71 seems to be ok with auto level, but the weather does not allowed to fly. The Pid parameters was test with calm wind 4 bf max .
"
Daniel Portillo replied to Giovanni Guastella's discussion Multiplx Mentor PID parameters"Thanks Nikos, I'll to test with that"
Nikos Gerarchakis replied to Giovanni Guastella's discussion Multiplx Mentor PID parameters"Hi Giovani this is my last Pid settings . Sorry for one year delate but i use Mentor the last month . I use APM v1.4 in this plane and the autolevelleling is not working ."
Giovanni Guastella posted a discussionMultiplx Mentor PID parameters
HI, There is somebodi who can suggest me the PID Parameters for the Multiplex Mentor. I use the APM 1 and mision planner. Thanks in advanceSee More
Henrik Flensburg replied to Giovanni Guastella's discussion Waypoints with APM planner"Hi Giovanni & Steve
i have more or less the same problem with the same HW setup 1280 rev 1.4 based APM and a oilpan. i use the APM on a quadrocopter first - and later on when i am familiar with the system, i am going to use on a…"
Steve replied to Giovanni Guastella's discussion Waypoints with APM planner"If stabilization and fly by wire mode are works good then the navigational PID gains are not good enough. Perhaps someone can join in and discuss what are efficient navigational tuning methods.
I believe the proper way is to set cross track gain to…"
Giovanni Guastella replied to Giovanni Guastella's discussion Waypoints with APM planner"I forgot to write that my red board has an ATM 1280, I fly with Easy Star II that have ailerons like the blixer ( That why I donladed the file configuration of the blixer). I use a futaba t12 Z 2.4 Gh. I did not esed the FTDI cable to donload the…"
Giovanni Guastella replied to Giovanni Guastella's discussion Waypoints with APM planner"Tank for the reply Steve. I have download the file configuration for the bixler. Steve, I tokk my hardware in Itali from an italian seller (web site of "regali e desideri) . On the red board there is written Arduino compatible, Sparkfin and the…"
Steve replied to Giovanni Guastella's discussion Waypoints with APM planner"I'm going to take a guess that you didn't configure your PID gains for your aircraft."
Giovanni Guastella replied to Andrew Tridgell's discussion ArduPlane 2.30 released!"i'm in trouble. I have an ardupilot mega 1280 and IMU shield. I did the update in APM mission planner from 2.28 to this last 2.30. My Ardupilot stopped to wo
rk. Did I do some mistake? Sorry for my bad english, i'm writing from Roma…"
Giovanni Guastella posted a discussionWaypoints with APM planner
Can anybody help me? I'm flyng with ardupilot, IMU, GPS mega tek, Magnetometer. When I set the waypoints on APM mission Planner, setting them wiyh the command write on APM I launch the plane but it do not follow the planned waypoints and after a first turn continue to follow a straith direction. Sorry for my bad english. TanksSee More
Profile Information
- About Me:
- Medical doctor. Love aereomodelling. I live in Roma Italy.
- Tell us a bit about your UAV interest
- Assisted and auto fly
- Hometown:
- Roma Italy
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduPlane User Group
676 members
-
ArduCopter User Group
1283 members
-
ArduRover User Group
183 members
-
Turkish Ardu Group
5 members
-
Terrain/Surface Mapping
116 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
