"That looks as a nice place to fly. If you need some help setting up offline-maps check this out: https://github.com/arthurbenemann/droidplanner/wiki/Offline-Maps"
-
Imko van Beckhoven
- Male
- Netherlands
- Blog Posts (2)
- Discussions (2)
- Groups
- Photos (3)
- Photo Albums
- Videos (2)
Imko van Beckhoven's Discussions
Input's output's powering the board problem
Started this discussion. Last reply by Emile L. Apr 18, 2012. 6 Replies 0 Likes
I want to power the board by the esc's bec's so i placed the JP1 jumper acourding to manual. But this seamse to make no difference, With or without JP1: output connected to a esc bec the board does…Continue
Imko van Beckhoven's Page
Latest Activity
Arthur Benemann commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner
Imko van Beckhoven commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"@Arthur Benemann: black map is because i had the setting use offline map's enabled. So human error !!"
Imko van Beckhoven commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"@Arthur Benemann: absolutly! the black map is probebly because i am impacaint (did not load yet ;-) ) ill try this later today"
Arthur Benemann commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"I hope you enjoy DroidPlanner :).
I still don't know why your map is black (right side of the screen). Does it look black in google Earth also?"
Imko van Beckhoven commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"@Dave: for sure you need some wheight at the front! At the first flight i did not level my quad, so i had to compensate with the stick's my COG is just behind the the middel hole of the 3*2 hole's near the back leg's (Where the…"
Dave commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"Looks good, I was toying with my TBS, APM 2.5 with 750kv motors this weekend. The hardest part so far has been trimming it out. I don't have any FPV gear on the front so with a Nano 4000 3s on the back the drifting is pretty heavy. Rain and…"
Stefan Gofferje commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"Yeah... THAT happens if you don't take it slow / don't tune and go out in windy conditions...:
http://www.youtube.com/watch?v=F4xEHxDtm7Q"
Jan commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"@Imko, fully agree to take it slowly. I also hate it to break things.
@Josh, still hopes that the magic HK foam will do the trick, we'll see (fingers crossed)."
Josh Potter commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"I've had some of the same problem Jan. Without a suspending mount for the APM my alt-hold works great but any waypoint based flying starts a fly-away. I think with the TBS frame you have to drill."
Imko van Beckhoven commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"whell, since this is my first RC and my second season i like it to be a bit less windy. But i am getting braver every day :)"
Jan commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"Imko,
Don't worry about wind, the TBS can handle it :-)
I was out yesterday for some testing on the 3.0 and I must say, apart from the virbation issues, the quad holds perfect in loiter even in gusty winds. This with stock PID setting, quite…"
Imko van Beckhoven commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"@Jan: i try to keep the firmware up2date but not the bèta's. For this setup i only have a about a minute backyard flying (kind of windy these day's) but i have no problem sharing my log's. I think tweaking PID's is a…"
Jan commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"Imko,The TBS flies well but the vibartions are a problem with the introduction of the inertial nav.I tested the 3.0rc3 on antoher frame without any issues however for the TBS it is another story.On my previous frame (TBS-clone) I fitted some O-ring…"
Imko van Beckhoven commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"@Stefan Goffertje: no none tuning what so ever, flying "out of the box" config. I try to avoid having eletronic's under the bottom plate.
@Jan: youre right, there is no vibration reduction at all. ill probably have the same…"
Jan commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"Hi Imko,
Looks very nice.How did you tackle the vibration reduction as I can't see it from the pictures?Did you mount some foam under the plywood support?
My TBS flies very well in stab mode but as sson as I switch to alt hold and loiter I get…"
Stefan Gofferje commented on Imko van Beckhoven's blog post TBS Discovery Build + Android droidplanner"I know the problem :). I have a MF450 and it took me a while to find good places for all the stuff. Especially, as I also use FrSKY and their telemetry RXs are mean GPS jammers.
I'm currently waiting for spare motor (hopefully arrive this week)…"
Profile Information
- About Me:
- Started whith a quad build
- Tell us a bit about your UAV interest
- just getting started
Imko van Beckhoven's Photos
Imko van Beckhoven's Videos
Imko van Beckhoven's Blog
TBS Discovery Build + Android droidplanner
Posted on June 3, 2013 at 12:39am 19 Comments 6 Likes
Yesterday i got my Team Black Sheep (TBM) Discovery top and bottom plate. Today i started working on te "rebuild".
As for the TBM there are no cleare APM 2.0 mounting hole's so i had to make some. But first the result!
I wanted a clean look,…
Continue Quad First flight
Posted on January 28, 2012 at 12:08pm 12 Comments 1 Like
It took me a while to get to this point, Build log (in dutch) but now i am almost there. Yes almost, I've got myself a very strange arming procedure. But enjoy the video first.
Arming procedure:
- Connect copter whit USB to laptop.
- Let APM 2.0…
Comment Wall
- No comments yet!
Social Networking
Top Content
Contests
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.A list of all T3 contests is here.
Groups
-
ArduCopter User Group
1355 members
-
ArduRover User Group
206 members
-
Documentation Editors
52 members
-
ArduPlane User Group
719 members
-
Andropilot Users Group
203 members
Advertisement
© 2013 Created by Chris Anderson.
Powered by
