(Original 4/20/12; Edited 3/16/13 to reflect a working configuration) tl;dr -Running Mission Planner via a Windows VM on Mac VMWare may report verification failures when loading firmware.The comments…Continue
"Great idea. What do you think about a generic inline 1-2A resettable circuit breaker? Solder it between XT60s or your power adapter of choice... Could work with any battery or wall supply, so you could easily take it to the field too. If it has a…"
"Mission Planner 1.2.33 working on Boot Camp Windows 7 Pro 64bit on a Mac Pro 13".-Use Jerry's suggested setting for the USB port (115200, 8, None, 1, Xon/Xoff) by setting the port properties in Device Manager-Change the Mission…"
"Hi Jeff -
Well, so far the only interested parties have been international. I've had really bad problems with international PayPal scams before, so I'm really hesitant (sorry Johar and those who PM'd). I'm about to switch into a…"
"Why does an offer like this have to come up during the off season at work :-(
If you could "forget" that you were selling this for a month or two -wink-wink-
Don't suppose you are in dire need of a new TH9x or 6 x 36-48 1450kv…"
"i tried mono on mac, i found it tooooo slow, and all graphic screens appears out of the right place ,
is it something else i should configure to make it work better , or it will always be slower than VB?
At Maker Faire, Chris said auto-land is a hard problem. While I don't have much to contribute to that yet, I did want to try deploying a ballistic parachute mid-air to bring a plane down. A few others have shared successful parachute systems before.