"NM I need to read above ......... "

"I'm at a loss here. I have tried ever way to search for this and can not find any info. I have a APM2 with built in mtech gps. I want to replace it with a ublox, is there any information on the forums explaining if this can be done and how…"

"Nice, although I went with the internal DIY Frsky module. I don't like the ant out the back thing as my spectrum module on the Futaba has it and is a pain when it comes to storing it in the case. I always worry about bumping the ant. connection…"

"Yea , I'm with you Luke. I am curious to know as I am always open to new stuff :) I have a Futaba T9CHP with spectrum module and it works with no hitches.  I also have a Tunigy 9x with ER9X Software and FRsky TX/rx telemetry setup and it…"

"http://www.youtube.com/watch?v=16FdJrrAWSo :) Have a great day !!! Ken "

"Smells like a fish, must be a fish....... "

"I been helping a guy over here, http://www.diydrones.com/forum/topics/i-ve-tried-everything-on-here-but-it-still-wobbles-and-flips-on?commentId=705844%3AComment%3A976000 Don't know if that will help you but it might help some one. Ken"

"You should be changing those numbers to be the same on roll and pitch. They are locked together by default. Not moving them together is where you got the odd behavior. You may need to start over as you move both because the number you have now will…"

"@ Nate, reprogram your esc's for nicad's. That ends the shut off problem and will allow you to land with out a crash. Just pay attention to flight time to prevent lipo damage for overdraw. @Ben, ESC is not your issue. Drop them as Nate…"

"My problem is, quad wobbles and flips immediately after leaving the ground.     Lower pid's....   Ken  "

"Sure would. Most are not broken but just need some patience. Some people don't have that. Alot would love to have a cheaper APM. If they wish to unload them instead of working with it, then why not offer to buy them ? Ken "

"PM me with a price ? Ken "

"Oh ya, if you get one of these......be really careful with the usb port as you can rip it right off the board. Been there done that. Its pads are to thin to hold it to the board and the designer has admitted it needs revised. Says next revision…"

"I fly 3 of these, one in quad one in octo and one in tri.  I use MegaPrirate port as I trust the APM2's I have and know the software and features. I do own as shown above APM2's. So what do you loose ? No logging, GPS is a bit odd to…"

"Umm, careful with the use of this "The APM Buyback thread!" as it would make it look like 3DR buys them back. And that opens new cans of worms to cry over. Yea I know but people do not read close enough. Member buy back maybe or, and…"

"pffft, shut up and fly !!! :) "