"I have not done any changes to it nor I have used any software. It is all default settings."

"Thanks for the video Nishid, ifs very helpful. Do you done any change in the t6a software (t6config) or is it stock."

"Hello hamza here is the link for the video: http://www.youtube.com/watch?v=rtERO8R-gzg&feature=youtu.be "

"Awesome, i Will wait for the video!!"

"Hello hamza I will make a video tomorrow and post it here on how I did it. But I have only tested this setup with the mission planner and as I turn the knob which is connected to the channel 5 the flight mode changes from flight mode 1 to flight…"

"Can you send me tour config file to use with t6config?"

"Hi, CAN you please post tour setting for the t6a that CAN take 6 modes in the knob?. It Will be realy Nice if you explain to me how you did it, Thanks in advance."

"FLIGHT MODES SELECTION USING THE KNOB(CHANNEL 5) ON THE HK-T6A V2 2.4GHX RADIO"

"the flight modes are not coming up in order."

"Comment by emile on October 31, 2011 at 1:25am " Be sure you have Flaps to 100 for NORM and LAND and that ELEV (in the FLAPS menu) are all to 0."  both NORM AND LAND on FLAP side the arrow is pointing upward and is set to 100 is that…"

"MODE GEAR        ELE D/R FLAP MODE 1 OFF OFF     OFF works fine MODE 2 ON OFF             OFF goes to mode 6 MODE…"

"@TFrancis TRY THIS:plug the APM2 BOARD to you computer and go to control panel --> system --> Devise Manger and there you will see a icon with a magnifing glass click on it. when you do so it will scan the computer to detect if you have pluged…"

"THIS IS FOR PEOPLE HAVING TROUBLE UPLOADING BOTH THE CODE APMROVERV 1.0 AND APMROVER V2 using ARDUINO IDE. (1) unzip the folder that you download from this page. (2) copy and paste APMROVERV 1.0 or APMROVER V2 and its LIBRARIES folder on to…"